1993/12/01 Caterpillar


New Inlet/Exhaust Valve Has A Chrome Stem

Usage:


G3508 (2FJ),
G3512 (4KC),
G3516 (3RC) Engines

Description of Change: A new inlet/exhaust valve with a chrome stem is used. The new valve increases valve train efficiency and reduces the occurrence of valve sticking.

Adaptable To: The new 104-7184 Inlet/Exhaust Valve is a direct replacement for the former 4P-2852 Inlet/Exhaust Valve. The new inlet/exhaust valve is in effect as shown in Chart A. The new inlet/exhaust valve can be installed in the engines identified in Chart B. The new inlet/exhaust valve has a face angle of 191/4 degrees. The former inlet/exhaust valve has a face angle of 193/4degrees. Although the face angle has changed, the two valves are completely interchangeable upon retrofit.

Caterpillar Information System:

1993/12/01 New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups
1993/12/01 The 1W-1420 Oil Cooler Bracket For Marine Gears Has Been Modified
1993/12/01 Clarify Usage Of Parts Service Cylinder Head Gaskets
1993/12/01 New Fuel Filter Helps Prevent Hard Starting Due To Injector Wear
1993/12/01 New Control Assemblies Used In Fuel Injection Control Groups
1993/11/01 Training Available Via Videotapes For Service And Marketing Systems
1993/11/01 0R5207 Remanufactured Starter May Not Fit In Some Applications
1993/11/01 8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved
1993/11/01 New Exhaust Valve and Water Cooled Valve Seat Inserts (Heavy Fuel Engines Only)
1993/11/01 Alarm/Shutdown System For Cogeneration Or Landfill Applications
1993/11/01 Oil Recommendations For The 3500 Family Of Engines
1993/11/01 New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area
1993/12/01 Carburetor Control Linkage (EG3P Governor)
1993/12/01 New High Temperature Resistant Seal Group Available For Jacket Water Pump
1993/12/01 Oil Guidelines For 3600 Engines
1993/12/01 Uses, Characteristics, And Removal of Castrol Tarp®, Tarp-B®, And 4164®
1994/01/01 New Valve Cover Gasket Used{1107}
1994/01/01 Low Coolant Level Plate In Radiator May Cause False Coolant Level Readings{1353}
1994/01/01 New Piston Body Has Improved Bonding Between Iron Band And Aluminum Body{1214}
1994/01/01 New Diaphragm Used In Governor Air Actuator Group Improves Service Life{1265}
1994/01/01 New 3161 Governors{1289}
1994/01/01 New Torque Specification For The Bolts That Fasten The Rear Housing To The Cylinder Block{1151}
1994/01/01 Proper Storage of Caterpillar Electric Set Generators{1404}
1994/01/01 List of Service Publications
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.