Usage:
Start By:
a. raise the operator platform
1. Remove plug (2).
2. Open valve (3). Drain fuel tank (1) into a suitable container.
3. Loosen two hose clamps (4).
4. Slide hose (5) onto fuel tank filler (6).
5. Remove two bolts (7) and washers.
6. Remove fuel tank filler (6).
7. Disconnect fuel line (8) from the fuel tank. Cap or plug immediately.
8. Disconnect fuel line (9) from the fuel tank. Cap or plug immediately.
9. Disconnect fuel line (10) from the fuel tank. Cap or plug immediately.
10. Disconnect two wires (11) from fuel tank.
11. Support the fuel tank with a suitable floor jack (12).
12. Remove two nuts (13) and washers from the right side of the fuel tank.
13. Remove two nuts (14) and washers from the left side of the fuel tank.
14. Lower the floor jack slowly. Remove the fuel tank from under the machine.
NOTE: For installation of the fuel tank, reverse the removal steps.
End By:
a. lower the operator platform