New Crankshaft Thrust Plate Made Of Brass
Usage:
3500 Family Of Engines
Description of Change: A new crankshaft thrust plate, that is made of solid brass, is used on the 3500 Family of Engines. The former crankshaft thrust plate was made of steel-backed aluminum.
Adaptable To: The new 7C6209 Thrust Plate is a direct replacement for the former 2W0646 Thrust Plate. The new thrust plate is effective as shown in the charts.
Caterpillar Information System:
1989/05/01 Use Care When Positioning Turbocharger Compressor Housing
1989/05/01 Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors
1989/05/01 New Clamps With Grommets Used In Fuel Lines
1989/05/01 Check Valve Added To Fuel Injection Lines
1989/05/01 Fuel Manifolds Changed To Steel
1989/05/01 Longer Bolts Give More Life To Gaskets Between Water Cooled Aftercooler Housings
1989/05/01 New Heavy-Duty Air Cleaner Groups Available
1989/05/01 Front Idler And Accessory Drive Gears Improved
1989/05/01 New Installation Procedure For Unit Injectors
1989/04/01 List of Service Publications
1989/04/01 New Service Tools Available
1989/04/01 Causes And Effects Of Low Battery Voltage On Electric Starters
1989/05/01 Keys For Power Modules Shipped Inside Air Louver
1989/05/01 Do Not Prefill Secondary Fuel Filter
1989/05/01 New Valve Stem Seal Used On Inlet Valves And Added To Exhaust Valves
1989/05/01 New Head Gasket Used
1989/05/01 Procedure For Replacing Batteries Or Battery Cables
1989/06/01 Maintenance Inspection Of Emergency Shutdown Systems Required Every 1000 Hours
1989/06/01 New Extension Assembly Used In Gas Engine Ignition Groups
1989/06/01 New Front Crankshaft Seal Requires New Installer Tool
1989/06/01 New Upper and Lower Seals For Folded Core Radiators In Cold Temperature Applications
1989/06/01 Vibration Measurement System For Caterpillar Products
1989/06/01 "CXP Fluids" Are Now "Cat Fluids"
1989/06/01 Identification Of Asbestos-Free Material