Offset Boom Cylinder - Remove and Install
- Reposition swing and boom (1) until offset boom cylinder is fully extended.
Show/hide table
Illustration 2 g06356038 - Remove bolt (2) and pin (3).
Show/hide table
Illustration 3 g06356042 - Remove shims (4).
- Move offset boom cylinder (5) away from swing and boom (1).
Show/hide table
Illustration 4 g06356046 - Retract offset boom cylinder (5) fully.
Show/hide table
Illustration 5 g06356078 - Cut cable strap (6).
- Disconnect harness assemblies (7).
Show/hide table
Illustration 6 g06356080 - Remove bolts (8).
Show/hide table
Illustration 7 g06356081 - Remove bolts (9) and panel (10).
Show/hide table
Illustration 8 g06356082 - Remove bolt (11) and pin (12).
- Release the hydraulic system pressure.
Show/hide table
Illustration 9 g06356083 - Disconnect two hose assemblies (13).
Show/hide table
Illustration 10 g06356084 - Attach a suitable lifting device (14) and partially remove cylinder (5).
Show/hide table
Illustration 11 g06356096 - Attach a suitable lifting device (15) and partially remove cylinder (5).
Show/hide table
Illustration 12 g06356091 - Disconnect grease line (16).
Show/hide table
Illustration 13 g06356099 - Cut cable strap (17) and remove offset boom cylinder (5).
Show/hide table
Illustration 1 | g06356035 |
- Install offset boom cylinder (5) in the reverse order of removal.
Caterpillar Information System:
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Electronic Control Module - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Electric Starting Motor - Remove and Install
336 and 336 GC Excavator Restricted Visibility
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Air Cleaner - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Electronic Unit Injector - Test
C3.3B Engines for Caterpillar Built Machines Fuel Injector - Test
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Stick - Remove and Install
140 Motor Grader Machine Systems Fan and Fan Guard - Remove and Install
140 Motor Grader Machine Systems Wheel Lean Arm and Axle Bushings - Remove and Install - All-Wheel Drive
C9.3B Industrial Engines Exhaust Manifold - Remove
140 Motor Graders Monitoring System System Schematic
140 Motor Graders Monitoring System Connector Contact Description
New Oil Pan is Now Used on Certain C175 Engines {1302, 1302} New Oil Pan is Now Used on Certain C175 Engines {1302, 1302}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Pressure Sensor (Cooled Exhaust Gas) - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Engine Rear Mount - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement System Pressure - Release
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Blade Cylinder - Remove and Install
C9.3B Industrial Engines Exhaust Manifold - Install
140 Motor Grader Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install
140 Motor Grader Machine Systems Wheel Lean Cylinder - Remove and Install
New Engine Software are Now Used on Certain 3512C and 3516C Engines {1920} New Engine Software are Now Used on Certain 3512C and 3516C Engines {1920}
140 Motor Grader Systems Electronic Control (Fan Hydraulic System)
3412C Generator Sets Maintenance Interval Schedule - Prime
320 GC, 320, and 323 Excavator TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} 320 GC, 320, and 323 Excavator TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}