Stick - Remove and Install
Start By:
- Remove bucket
Note: A CWS login is required to access Caterpillar Channel1. Scan the QR code below with a QR enabled device or copy the link that follows.
Show/hide table
Illustration 1 | g06415113 |
Reference: For more information, refer to "308 Mini Hydraulic Excavator Stick - Remove" on Caterpillar Channel1,
https://channel1.mediaspace.kaltura.com/media/t/1_9vf7k6pm- Remove hose assemblies (1).
Show/hide table
Illustration 3 g06356885 - Attach a suitable lifting device (2) to cylinder (3).
Show/hide table
Illustration 4 g06356889 - Remove bolt (4).
- Remove pin (5) and cylinder (3). The cylinder weighs approximately 31 kg (70 lb).
Show/hide table
Illustration 5 g06356891 - Remove bolts (6).
- Reposition bracket with hose assemblies (7).
- Repeat for opposite side.
Show/hide table
Illustration 6 g06356894 - Remove hose assemblies (8).
Show/hide table
Illustration 7 g06356895 - Remove bolt (9).
- Remove pin (10).
- Install pin (11).
Show/hide table
Illustration 8 g06359352 - Attach a suitable lifting device (11).
Show/hide table
Illustration 9 g06356900 - Remove bolt (12).
- Remove pin (13) and the stick (14).
Show/hide table
Illustration 2 | g06356883 |
Note: A CWS login is required to access Caterpillar Channel1. Scan the QR code below with a QR enabled device or copy the link that follows.
Show/hide table
Illustration 10 | g06415139 |
Reference: For more information, refer to "308 Mini Hydraulic Excavator Stick - Install" on Caterpillar Channel1,
https://channel1.mediaspace.kaltura.com/media/t/1_2lohvx87- Install stick (14) in reverse order of removal.
Caterpillar Information System:
140 Motor Grader Machine Systems Fan and Fan Guard - Remove and Install
140 Motor Grader Machine Systems Wheel Lean Arm and Axle Bushings - Remove and Install - All-Wheel Drive
C9.3B Industrial Engines Exhaust Manifold - Remove
140 Motor Graders Monitoring System System Schematic
140 Motor Graders Monitoring System Connector Contact Description
140 Motor Graders Monitoring System Module - Flash Program
140 Motor Graders Monitoring System Module - Replace
140 Motor Graders Monitoring System Wiring Harness (Short Circuit) - Test
140 Motor Graders Monitoring System Wiring Harness (Open Circuit) - Test
140 Motor Graders Monitoring System Electrical Connector - Inspect
140 Motor Graders Monitoring System CAN Data Link - Test
140 Motor Graders Monitoring System Alarm - Test
C3.3B Engines for Caterpillar Built Machines Fuel Injector - Test
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Electronic Unit Injector - Test
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Air Cleaner - Remove and Install
336 and 336 GC Excavator Restricted Visibility
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Electric Starting Motor - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Electronic Control Module - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Offset Boom Cylinder - Remove and Install
New Oil Pan is Now Used on Certain C175 Engines {1302, 1302} New Oil Pan is Now Used on Certain C175 Engines {1302, 1302}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Pressure Sensor (Cooled Exhaust Gas) - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Engine Rear Mount - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement System Pressure - Release
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Blade Cylinder - Remove and Install