Electric Starting Motor - Remove and Install
Start By:
- Turn the disconnect switch to the OFF position
- Open door (1).
Show/hide table
Illustration 2 g06355919 - Reposition cover (2).
Show/hide table
Illustration 3 g06355924 - Disconnect cable (3).
- Disconnect harness assembly (4).
Show/hide table
Illustration 4 g06355929 - Remove 3 nuts (5) and starter motor (6).
Show/hide table
| |
| Illustration 1 | g06355916 |
- Install electric starting motor (6) in the reverse order of removal
- Install nut (3) and tighten to a torque of 11 N•m (97 lb in).
Caterpillar Information System:
336 and 336 GC Excavator Restricted Visibility
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Air Cleaner - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Electronic Unit Injector - Test
C3.3B Engines for Caterpillar Built Machines Fuel Injector - Test
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Stick - Remove and Install
140 Motor Grader Machine Systems Fan and Fan Guard - Remove and Install
140 Motor Grader Machine Systems Wheel Lean Arm and Axle Bushings - Remove and Install - All-Wheel Drive
C9.3B Industrial Engines Exhaust Manifold - Remove
140 Motor Graders Monitoring System System Schematic
140 Motor Graders Monitoring System Connector Contact Description
140 Motor Graders Monitoring System Module - Flash Program
140 Motor Graders Monitoring System Module - Replace
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Electronic Control Module - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Offset Boom Cylinder - Remove and Install
New Oil Pan is Now Used on Certain C175 Engines {1302, 1302} New Oil Pan is Now Used on Certain C175 Engines {1302, 1302}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Pressure Sensor (Cooled Exhaust Gas) - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Engine Rear Mount - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement System Pressure - Release
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Blade Cylinder - Remove and Install
C9.3B Industrial Engines Exhaust Manifold - Install
140 Motor Grader Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install
140 Motor Grader Machine Systems Wheel Lean Cylinder - Remove and Install
New Engine Software are Now Used on Certain 3512C and 3516C Engines {1920} New Engine Software are Now Used on Certain 3512C and 3516C Engines {1920}
140 Motor Grader Systems Electronic Control (Fan Hydraulic System)