Crankshaft Front Seal - Remove and Install
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 367-3534 | Oil Seal Removal & Installer Tool | 1 |
Start By:
- Remove the Cooling System Package (Radiator, Hydraulic Oil Cooler, and Aftercooler).
- Remove the crankshaft vibration damper and pulley.
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position Tooling (A) onto crankshaft front seal (2).
- Turn Tooling (A) in a counterclockwise direction and remove crankshaft front seal (2) from front cover (1).
Show/hide table
| |
| Illustration 1 | g06310630 |
- Ensure that the front cover is free from damage.
Show/hide table
Illustration 2 g06310637 - Correctly position a new crankshaft front seal (2) in Position (X) onto front cover (1).
- Position Tooling (A) onto crankshaft front seal (2).
- Use Tooling (A) to turn crankshaft front seal (2) in clockwise direction.
- If necessary, apply a torque greater than
50 N·m (37 lb ft) to install crankshaft front seal (2). Remove crankshaft front seal (2). Inspect crankshaft front seal (2) and front cover (1) for faults or damage. - If necessary, repeat Step 2 through Step 5 to install crankshaft front seal (2).
End By:
- Install the crankshaft vibration damper and pulley.
- Install the Cooling System Package (Radiator, Hydraulic Oil Cooler, and Aftercooler).
Caterpillar Information System:
320D3 and 323D3 Excavators Systems Main Hydraulic System
323D3 Hydraulic Excavators Engine Supplements Water Pump - Remove and Install
320D3 Hydraulic Excavator Machine Systems Load Control Valve (Stick Cylinder) - Assemble
320D3 Hydraulic Excavator Machine Systems Storage Box and Covers (Cab) - Remove and Install
320D3 Hydraulic Excavator Machine Systems Seat - Remove and Install
797F Tier 4 Off-Highway Truck Engine Supplement Clean Emissions Module - Remove and Install
C32 Marine Engine Refill Capacities
Bench Test Procedure for Hydraulic Piston Pumps {5070} Bench Test Procedure for Hydraulic Piston Pumps {5070}
336 Excavator Machine Systems Swing Drive - Remove and Install
320D3 Excavators Joystick Controls
320D3 Excavators Air Conditioning and Heating Control
320D3 Excavators Fuses - Replace
320D3 Excavators Boom/Stick/Bucket Combinations
320D3 Hydraulic Excavator Machine Systems Bucket Cylinder - Disassemble
323D3 Hydraulic Excavators Engine Supplements Valve Mechanism Cover - Remove and Install
323D3 Hydraulic Excavators Engine Supplements Turbocharger - Remove and Install
320D3 Hydraulic Excavator Machine Systems Bucket Cylinder - Assemble
C175 Tier 4 Final Engines for Caterpillar Built Machines Air Inlet Manifold - Remove and Install
The Buffer Seal Assembly in the Steering Cylinder Group May Wear Prematurely on Certain 773G, 775G, and 777G Off-Highway Trucks {4303, 7555} The Buffer Seal Assembly in the Steering Cylinder Group May Wear Prematurely on Certain 773G, 775G, and 777G Off-Highway Trucks {4303, 7555}
Rework Procedure for New Voltage Selector Switch Cable Routing Now Used on Certain XQ35 and XQ60 Generator Sets {1410} Rework Procedure for New Voltage Selector Switch Cable Routing Now Used on Certain XQ35 and XQ60 Generator Sets {1410}
The 293-4388 Clamp As May Break on Certain 3500 Series Engines {1051, 1054} The 293-4388 Clamp As May Break on Certain 3500 Series Engines {1051, 1054}
New Engine Software is Now Used on Certain C9 Industrial Engines {1920} New Engine Software is Now Used on Certain C9 Industrial Engines {1920}
320D3 and 323D3 Excavators Systems Relief Valve (Main)
320D3 Excavators Leaving the Machine