Bucket Cylinder - Disassemble
Start By:
- Remove the bucket cylinder.
- Remove fitting (3) from the rod end.
- Remove seals (1) and sleeve bearing (2).
Show/hide table
Illustration 2 g06310738 - Remove fitting (6) from the head end.
- Remove seals (4) and sleeve bearing (5).
Show/hide table
Illustration 3 g06310741 - Remove bolts (7) and rod assembly (8).
Show/hide table
Illustration 4 g06310743 - Remove set screw (9), ball (10), and lock nut (11).
Show/hide table
Illustration 5 g06310746 - Remove piston (12).
Show/hide table
Illustration 6 g06310748 - Remove ring (14), rings (16), seal assembly (13), rings (15), and seal (17) from the piston.
Show/hide table
Illustration 7 g06310750 - Remove head (18).
Show/hide table
Illustration 8 g06310751 - Remove ring (23), seal (22), back up ring (21), seal (20), and seal (19) from the head.
Show/hide table
Illustration 9 g06310752 - Remove ring (27), sleeve bearing (26), seal (24), and backup ring (25) from the head.
Show/hide table
Illustration 1 | g06311225 |
Caterpillar Information System:
320D3 Excavators Boom/Stick/Bucket Combinations
323D3 Hydraulic Excavators Engine Supplements Crankshaft Front Seal - Remove and Install
320D3 and 323D3 Excavators Systems Main Hydraulic System
323D3 Hydraulic Excavators Engine Supplements Water Pump - Remove and Install
320D3 Hydraulic Excavator Machine Systems Load Control Valve (Stick Cylinder) - Assemble
320D3 Hydraulic Excavator Machine Systems Storage Box and Covers (Cab) - Remove and Install
320D3 Hydraulic Excavator Machine Systems Seat - Remove and Install
797F Tier 4 Off-Highway Truck Engine Supplement Clean Emissions Module - Remove and Install
C32 Marine Engine Refill Capacities
Bench Test Procedure for Hydraulic Piston Pumps {5070} Bench Test Procedure for Hydraulic Piston Pumps {5070}
336 Excavator Machine Systems Swing Drive - Remove and Install
320D3 Excavators Joystick Controls
323D3 Hydraulic Excavators Engine Supplements Valve Mechanism Cover - Remove and Install
323D3 Hydraulic Excavators Engine Supplements Turbocharger - Remove and Install
320D3 Hydraulic Excavator Machine Systems Bucket Cylinder - Assemble
C175 Tier 4 Final Engines for Caterpillar Built Machines Air Inlet Manifold - Remove and Install
The Buffer Seal Assembly in the Steering Cylinder Group May Wear Prematurely on Certain 773G, 775G, and 777G Off-Highway Trucks {4303, 7555} The Buffer Seal Assembly in the Steering Cylinder Group May Wear Prematurely on Certain 773G, 775G, and 777G Off-Highway Trucks {4303, 7555}
Rework Procedure for New Voltage Selector Switch Cable Routing Now Used on Certain XQ35 and XQ60 Generator Sets {1410} Rework Procedure for New Voltage Selector Switch Cable Routing Now Used on Certain XQ35 and XQ60 Generator Sets {1410}
The 293-4388 Clamp As May Break on Certain 3500 Series Engines {1051, 1054} The 293-4388 Clamp As May Break on Certain 3500 Series Engines {1051, 1054}
New Engine Software is Now Used on Certain C9 Industrial Engines {1920} New Engine Software is Now Used on Certain C9 Industrial Engines {1920}
320D3 and 323D3 Excavators Systems Relief Valve (Main)
320D3 Excavators Leaving the Machine
320D3 Excavators Securing the Machine
320D3 Excavators Lifting and Tying Down the Machine