Turbocharger - Remove and Install
Show/hide table
 |
|
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Open hood (1).
Show/hide table
Illustration 2 g06312314 - Loosen clamp (5) and disconnect hose (2).
- Loosen clamp (4) and disconnect exhaust pipe (3).
- Loosen clamp (7) and disconnect hose (6).
Show/hide table
Illustration 3 g06312315 - Remove banjo bolt (8) and disconnect the inlet pipe.
- Remove bolts (10) and disconnect drain pipe (9).
Show/hide table
Illustration 4 g06312316 - Remove bolts (11), turbocharger (12), and the gasket.
Show/hide table
| |
| Illustration 1 | g06312313 |
- Install turbocharger (12) in the reverse order of removal.
Caterpillar Information System:
323D3 Hydraulic Excavators Engine Supplements Valve Mechanism Cover - Remove and Install
320D3 Hydraulic Excavator Machine Systems Bucket Cylinder - Disassemble
320D3 Excavators Boom/Stick/Bucket Combinations
323D3 Hydraulic Excavators Engine Supplements Crankshaft Front Seal - Remove and Install
320D3 and 323D3 Excavators Systems Main Hydraulic System
323D3 Hydraulic Excavators Engine Supplements Water Pump - Remove and Install
320D3 Hydraulic Excavator Machine Systems Load Control Valve (Stick Cylinder) - Assemble
320D3 Hydraulic Excavator Machine Systems Storage Box and Covers (Cab) - Remove and Install
320D3 Hydraulic Excavator Machine Systems Seat - Remove and Install
797F Tier 4 Off-Highway Truck Engine Supplement Clean Emissions Module - Remove and Install
C32 Marine Engine Refill Capacities
Bench Test Procedure for Hydraulic Piston Pumps {5070} Bench Test Procedure for Hydraulic Piston Pumps {5070}
320D3 Hydraulic Excavator Machine Systems Bucket Cylinder - Assemble
C175 Tier 4 Final Engines for Caterpillar Built Machines Air Inlet Manifold - Remove and Install
The Buffer Seal Assembly in the Steering Cylinder Group May Wear Prematurely on Certain 773G, 775G, and 777G Off-Highway Trucks {4303, 7555} The Buffer Seal Assembly in the Steering Cylinder Group May Wear Prematurely on Certain 773G, 775G, and 777G Off-Highway Trucks {4303, 7555}
Rework Procedure for New Voltage Selector Switch Cable Routing Now Used on Certain XQ35 and XQ60 Generator Sets {1410} Rework Procedure for New Voltage Selector Switch Cable Routing Now Used on Certain XQ35 and XQ60 Generator Sets {1410}
The 293-4388 Clamp As May Break on Certain 3500 Series Engines {1051, 1054} The 293-4388 Clamp As May Break on Certain 3500 Series Engines {1051, 1054}
New Engine Software is Now Used on Certain C9 Industrial Engines {1920} New Engine Software is Now Used on Certain C9 Industrial Engines {1920}
320D3 and 323D3 Excavators Systems Relief Valve (Main)
320D3 Excavators Leaving the Machine
320D3 Excavators Securing the Machine
320D3 Excavators Lifting and Tying Down the Machine
New Software Updates Are Now Used On Certain C9.3 through C18 Engines {1920} New Software Updates Are Now Used On Certain C9.3 through C18 Engines {1920}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Restricted Visibility