New Rotary Switch is Now Used for MECP1 Panel on Certain Engines {7451}
- Engine
- C18 (S/N: TNA1-5387; JLE1-6012; T2R1-5744)
- Marine Engine
- C12.9MARENG (S/N: PC71-427; TPJ1-486)
- C32 MARINE (S/N: RPM1-885; SDN1-1866)
- C8.7 (S/N: CS71-465)
- C32 MARINE (S/N: RPM1-885; SDN1-1866)
Description Of Change: New rotary switch is now used for MECP1 panel on certain engines that are listed above. The new rotary switch is able to withstand the engine vibrations and maintain proper connection of the keyswitch circuit.
Adaptable To: The new rotary switch is adaptable to the engines within the listed serial numbers, and is effective with all engines after the listed serial numbers.
The new and former part numbers are listed in Table 1.
Show/hide table
Qty | New Part Number | Description | Former Part Number(1) |
---|---|---|---|
1 | Position Switch(Rotary) | 313-8923 |
Show/hide table
(1) | The former part number listed is for reference only and may differ. |
Show/hide table
Wire Location | ||||
---|---|---|---|---|
Former Drop-in Switch | New Rotary Switch | |||
Contact Block "A" | Deck 1 | |||
1 | L920-C3 | 1 | L920-C2
L920-C3 |
|
2 | 101-C4 | 2 | 101-C4 | |
3 | L920-C3
L920-C11 |
3 | L920-C6
L920-C11 |
|
4 | J906-C16 | 4 | J906-C16 | |
Contact Block "B" | Deck 2 | |||
1 | 391-C13 | 5 | 391-C13 | |
2 | 303-C23 | 6 | 303-C23 | |
3 | 391-C13
391-C18 |
7 | 391-C13
391-C18 |
|
4 | 391-C15 | 8 | 391-C15 | |
Contact Block "C" | Deck 3 | |||
1 | L920-C11 | 9 | L920-C11 | |
2 | J906-C19 | 10 | J906-C19 | |
3 | T789-C20 | 11 | T789-C20 | |
4 | T789-C17 | 12 | T789-C17 |
Show/hide table
Illustration 1 | g06284117 |
Wire location of former drop-in switch. (A) Top: T789-C20, Bottom: L920-C11 (B) Top: 391-C13, Bottom: 391-C13 (C) Top: L920-C3, Bottom: L920-C3 (D) Top: T789-C17, Bottom: J906-C19 (E) Top: 391-C15, Bottom: 303-C23 (F) Top: J906-C16, Bottom: 101-C4 |
Illustration 1represents the wire location of former drop-in switch.
Show/hide table
Illustration 2 | g06284114 |
New rotary switch wire locations - Top side (1) L920-C2/L920-C3 (3) L920-C6/L920-11 (5) 391-C13 (7) 391-C16/391-C18 (9) L920-C11 (11) T789-20 |
Illustration 2 represents the wire location of new rotary switch - Top side.
Show/hide table
Illustration 3 | g06284162 |
New rotary switch wire locations - Bottom side (2) 101-C4 (4) J906-C16 (6) 303-C23 (8) 391-C15 (10) J906-C19 (12) T789-C17 |
Illustration 3 represents the wire location of new rotary switch - Bottom side.
Caterpillar Information System:
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Air Conditioning and Heating Control
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Radio
Shutdowns May Occur with NOx Sensor Diagnostic Codes Present on Certain CG137, G3400, G3500, and G3600 Gas Engines {191N, 7432} Shutdowns May Occur with NOx Sensor Diagnostic Codes Present on Certain CG137, G3400, G3500, and G3600 Gas Engines {191N, 7432}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Fuel Transfer Pump (Refueling) - If Equipped
C9.3B Engines for Caterpillar Built Machines Diesel Exhaust Fluid Module - Disassemble
SCR Retrofit Aftertreatment Kit Catalyst (SCR) - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Monitoring System
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Camera - If Equipped
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Air Cleaner - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Battery Disconnect Switch
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Fuel Tank Cap - Clean
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Operator Controls
C18 Generator Sets Generator - Dry
C9 Generator Set Generator Bearing - Inspect
PVT110, PVT115 4V3 and PVT117 4V3 Photovoltaic Modules Electrical Connections - Check
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Main Hydraulic Pump Air - Purge
C18 Generator Sets Single Unit Operation
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Engine Performance - Test - Engine Speed
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Mirror
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Travel on Level Ground - Test
PVT110, PVT115 4V3 and PVT117 4V3 Photovoltaic Modules Module - Clean
PM820, PM822, and PM825 Cold Planer Machine Systems Rotor Drive Planetary - Remove and Install
C18 Generator Sets Generator Lead Connections
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Travel on Level Ground - Test - Optional Test