Manifold (DEF Heater) - Remove and Install
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 473-2944 | 封盖套件 | 1 |
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 473-2944 | 封盖套件 | 1 |
参考: 专门说明书, "目视维修步骤 - 颜色和符号" M0066576。
Show/hide table
注意 |
---|
请确保对柴油机排气处理液 (DEF) 系统进行的所有调整和修理均由经过适当培训的授权人员执行。 开始 DEF 系统上的任何工作前,请参阅操作和保养手册, "一般危险",了解相关安全信息。 |
Show/hide table
注意 |
---|
必须小心操作,确保产品性能检查、保养、测试、调整和维修期间不会漏掉系统的柴油机排气处理液 (DEF)。 在打开任何舱室或拆卸任何含有油液的部件前,请准备好盛接液体用的适当容器。 按照本地法规和要求处置所有油液。 |
将蓄电池断路开关转到断开位置前,确保完成 DEF 系统的净化过程。 请参阅操作和保养手册, "蓄电池断路开关",了解更多信息。
Show/hide table
图 1 | g06239797 |
Show/hide table
图 2 | g06236578 |
Show/hide table
图 3 | g06236608 |
Show/hide table
图 4 | g06239757 |
Show/hide table
图 5 | g06239772 |
Show/hide table
图 6 | g06239779 |
Show/hide table
图 7 | g06239791 |
- 按与拆卸相反的顺序安装歧管(DEF 加热器)。
Caterpillar Information System:
336, 336 GC and 340 Excavator Systems Bucket Cylinder
XQ125 Generator Set Cooling System Coolant Level - Check
XQ125 Generator Set Belt Tensioner - Inspect
XQ125 Generator Set Cooling System Coolant (DEAC) - Change
320 GC, 320, 323, 330 GC and 330 Excavator Machine Systems Troubleshooting Sensor Supply - Test - Display
320 GC, 320, 323, 330 GC and 330 Excavator Machine Systems Troubleshooting Ethernet Data Link - Test
320 GC, 320, 323, 330 GC and 330 Excavator Machine Systems Troubleshooting ECM Location Code - Test
336, 336 GC and 340 Excavator Systems Sensor (Data Link Type) - Test
XQ125 Generator Set Stopping the Engine
XQ125 Generator Set Sensors and Electrical Components
C32 Marine Engines Crankshaft Main Bearings - Install
C32 Marine Engines Engine Oil Pan - Remove and Install
C32 Marine Engines Speed/Timing Sensor - Remove and Install
C32 Marine Engines Inlet Manifold Pressure Sensor - Remove and Install
C32 Marine Engines Inlet Air Temperature Sensor - Remove and Install
320GC and 320 Excavator Engine Supplement Nitrogen Oxide Sensor - Remove and Install
336, 336 GC and 340 Excavator Systems Stick Cylinder
The Buffer Seal Groove May Wear on the Steering Cylinder Head on Certain 773G and 777G Off-Highway Trucks {4303} The Buffer Seal Groove May Wear on the Steering Cylinder Head on Certain 773G and 777G Off-Highway Trucks {4303}
C7.1 Marine Engine Exhaust Elbow - Remove and Install
C7.1 Engines Coolant Pressure Is Low
336, 336 GC and 340 Excavator Systems Pilot System
C32 Marine Engines Electronic Control Module - Remove and Install
794 AC Off-Highway Truck Magnetic Plug (Wheels) - Check
A New Service Replacement Control Board (APC1+) is Now Used on Certain Cat® Uninterrupted Power Supply {1418, 4480} A New Service Replacement Control Board (APC1+) is Now Used on Certain Cat® Uninterrupted Power Supply {1418, 4480}