1985/03/01 Caterpillar


New Pressure Conversion Chart Available

Usage:


A new metric conversion chart is available. This chart, titled "PRACTICAL PRESSURE CONVERSION CHART FOR FIELD CONVERSIONS," FORM SEES5677, gives the conversions between kPa, psi, in. hg, mm. Hg, cm. Hg, in. H2O, ft. H2O, cm. H2O, Atm, BAR, and kg/cm2. It covers the range of 0.5 to 1240.0 kPa (0.1 to 180 PSI). The chart measures 254 x 178 mm (10 x 7 in) and is printed on a special paper that resists oil, water and tears.

Caterpillar Information System:

1985/03/01 Do Not Weld On Painted Surfaces
1985/03/01 Exhaust Clamp Nut Now Serviced Separately
1985/03/01 Over Fueling Spring No Longer Used In Governor
1985/03/01 A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01 New Service Tools Available
1985/02/01 1985 Customer Training Available At Caterpillar Dealers (North America)
1985/02/01 Tighten Bolts To Correct Torque In 3161 Governor
1985/02/01 Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators
1985/02/01 New Air Cleaner Groups And Valve Mechanism Cover Group Used
1985/02/01 Wiring Harness Conduit Component Sizes
1985/02/01 New Temperature Recorders Available
1985/02/01 New Rear Crankshaft Seal Has Longer Service Life
1985/03/01 Bleed Holes On Parts Service Cylinder Heads
1985/03/01 New Cooling System Temperature Regulator Available
1985/03/01 Use The Correct Oil In Natural Gas Engines
1985/03/01 New Drive Coupler Kit Used On Altronic Magneto
1985/03/01 New Crankshaft Seal Groups Used On More 3400 Series Engines
1985/03/01 Increased Preload Used In Air Shutoff Actuators
1985/03/01 New Transmission Control Valve And Pressure Relief Valve Are Used With High Flow Oil Pump
1985/03/01 Input Shaft And Flange Available As An Assembly; Makes Alignment Easier
1985/03/01 Dowtherm 209 Full-Fill Coolant
1985/03/01 Cross Link Between Fuel Racks Has Smoother Surface
1985/03/01 New Air Cleaner Element Creates Less Restriction
1985/03/01 Installation Of Heli-Coils In Holes With Damaged Threads
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.