Remanufactured Cylinder Head Groups
Usage:
3208, 3306, 3406 And 3408 Engines
An article on this same subject was published in Engine News, February 22, 1984. The earlier article did not have complete information. Put a mark through the earlier article and make reference to this article.
Remanufactured cylinder head groups are now available in the United States and Canada for the above engines. These remanufactured cylinder heads include all the components of a standard cylinder head group. The cylinder heads which are shown in the chart can be returned for core credit. For additional information, on these remanufactured cylinder head groups see IRM REMFGD 84-9.
Caterpillar Information System:
1984/12/12 Important Differences In Engine Arrangements On 3208 Engines Equipped With Turbochargers
1984/12/12 Rear Power Take-Off Clutch Can use Nonmetallic Plates And Grease Lubrication For Main Bearings
1984/12/12 New Seal Used In Alternator Mounting Group
1984/12/12 Identification Of Camshaft Groups And Valve Mechanism Groups
1984/12/12 Preferred Engine Timing Procedures
1984/12/12 Addition Of Lubricator Will Help Prevent Corrosion In Air Prelube Motors
1984/12/12 Additional Clamp Reduces Vibration Of Turbocharger Oil Supply Line
1984/12/12 New 76.6°C (170°F) Water Temperature Regulators Used In Inlet Controlled Cooling Systems
1984/12/12 Starters That Remain Engaged After Engine Is Running
1984/12/12 Thread Identification Kit Available
1984/12/12 Remanufactured Turbocharger Groups
1984/12/12 Improved Turbocharger Oil Drain Elbows
1984/12/12 Use Care When Installing Circuit Boards In Regulators
1984/12/12 New Fuel Injector Assembly Reduces Smoke When Operating At Lower RPM And Load
1984/12/12 Bonnet Of Fuel Injection Pump Group Now Serviced Separately
1985/01/16 Install Different Body Assembly In Clutch Group To Correct Harsh Shifting
1985/01/16 Improved Valve Mechanism Cover Group Has A New Valve Cover And Seal
1985/01/16 Valve Lash Adjustment Not A Warranty Item
1985/01/16 Additions To Reference Chart For Major Production Changes
1985/01/16 Remanufactured Air Fuel Ratio Controls (U.S. And Canada)
1985/01/16 List of Service Publications
1985/01/16 Correct Specifications For Crankshaft Deflection
1985/01/16 Fill Oil Sump Before Installing Woodward Governor
1985/01/16 New Tools Available To Service Fuel Injection Nozzles And Adapters