Thread Identification Kit Available
Usage:
The 8T450 Thread Identification Kit is available to help determine metric, U.S. and British thread sizes. The size of internal port threads, external adapter threads and bolt threads can be measured with the tools in the kit.
Components of the 8T450 Thread Identification Kit are the 8T447 Dial Caliper, 8T448 Pitch Gauge, 8T449 Seat Angle Gauge, 8T451 Seat Angle Gauge, case and Special Instruction Form SEHS8429.
8T450 Thread Identification Kit.
Caterpillar Information System:
1984/12/12 Remanufactured Turbocharger Groups
1984/12/12 Improved Turbocharger Oil Drain Elbows
1984/12/12 A Soot Filter Is Available For Use With Air Cleaners
1984/12/12 New Pressure Gauges Have Dual Scales [kPa (psi)]
1984/12/12 Causes And Correction Of Opposite Crankshaft Rotation In Direct Injection Engines
1984/12/12 Additional Information For Correct Fuel Injector Timing
1984/10/24 New Cylinder Head Gasket Helps Prevent Oil Leakage Around Gear Pocket
1984/10/24 Wiring Changed On Voltage Regulators
1984/10/24 Deflection Of Flywheel Housings Should Be Controlled During Transportation
1984/10/24 New Heat Shield For Wiring To Electrical Shutoff Group
1984/10/24 New Heat Exchanger Group Has More Cooling Capacity
1984/10/24 Changes To Water Lines Group Increase Coolant Flow Through Exhaust Manifold
1984/12/12 Starters That Remain Engaged After Engine Is Running
1984/12/12 New 76.6°C (170°F) Water Temperature Regulators Used In Inlet Controlled Cooling Systems
1984/12/12 Additional Clamp Reduces Vibration Of Turbocharger Oil Supply Line
1984/12/12 Addition Of Lubricator Will Help Prevent Corrosion In Air Prelube Motors
1984/12/12 Preferred Engine Timing Procedures
1984/12/12 Identification Of Camshaft Groups And Valve Mechanism Groups
1984/12/12 New Seal Used In Alternator Mounting Group
1984/12/12 Rear Power Take-Off Clutch Can use Nonmetallic Plates And Grease Lubrication For Main Bearings
1984/12/12 Important Differences In Engine Arrangements On 3208 Engines Equipped With Turbochargers
1984/12/12 Remanufactured Cylinder Head Groups
1984/12/12 Use Care When Installing Circuit Boards In Regulators
1984/12/12 New Fuel Injector Assembly Reduces Smoke When Operating At Lower RPM And Load