320 GC, 320 and 323 Excavator Caterpillar


Seat Belt - Inspect

Usage:

320 GC BR4
Mielőtt a munkagépet működtetné, mindig ellenőrizze a biztonsági övnek, illetve a biztonsági öv rögzítőelemeinek az állapotát. Cserélje le a sérült vagy kopott alkatrészeket a gép üzemeltetése előtt.


Illusztráció 1g06224278
Jellemző példa

Ellenőrizze, hogy a csat (2) nem kopott vagy sérült-e. Ha a csat kopott vagy sérült, cserélje le a biztonsági övet.

Vizsgálja meg, van-e kopott vagy kirojtosodott háló a biztonsági övön (1). Cserélje le a biztonsági övet, ha annak anyaga kopott vagy kirojtosodott.

Ellenőrizze, hogy a biztonsági öv rögzítőelemei nem kopottak vagy sérültek-e. Cserélje le a kopott vagy sérült rögzítő elemeket. Ügyeljen arra, hogy a rögzítőcsavarok szorosak legyenek.

Ha a gépen biztonságiöv-meghosszabbító található, a biztonságiöv-meghosszabbítón is végezze el ezt a vizsgálati eljárást.

A biztonsági öv és a rögzítőelemek cseréje érdekében forduljon a Cat márkakereskedőjéhez.

Megjegyzés A biztonsági övet a beszerelésétől számított 3 év elteltével ki kell cserélni. A beszerelés dátumát jelző címke a biztonsági öv behúzóján és csatján található. Ha a beszerelés dátumát feltüntető címke hiányzik, akkor az övet a szöveten, a csat házán és a rögzítőfüleken (nem visszahúzódó övek esetén) található gyártási időtől számított 3 év elteltével cserélje ki.

Caterpillar Information System:

C9.3B Engines for Caterpillar Built Machines Fuel Pressure Sensor - Remove and Install
Regulatory Compliance Information Product Link - PL631 - If Equipped
320 GC, 320 and 323 Excavator Mounting and Dismounting
320 GC, 320 and 323 Excavator Windows - Clean
320, 323 Excavator Engine Supplement Refrigerant Condenser - Remove and Install
C175-16 Locomotive Engines Turbocharger - Inspect
C27 and C32 Tier 4 Final Marine Engines Fuel Filter Base
C27 and C32 Tier 4 Final Marine Engines Fan Drive
C27 and C32 Tier 4 Final Marine Engines Fuel Filter (Primary)
320GC Excavator Engine Supplement Electronic Control Module - Remove and Install
C27 and C32 Tier 4 Final Marine Engines Fuel Lines
Soot Sensor on Certain C4.4 and C7.1 Engines {108D, 108F, 108U} Soot Sensor on Certain C4.4 and C7.1 Engines {108D, 108F, 108U}
320GC Excavator Engine Supplement Fuel Filter and Base - Remove and Install - Secondary Fuel Filter
320, 323 Excavator Engine Supplement Electronic Control Module - Remove and Install
A New NOx Reduction System Cooler Group Is Now Used on All C9.3 Tier 4 Interim Engines {108C, 108G} A New NOx Reduction System Cooler Group Is Now Used on All C9.3 Tier 4 Interim Engines {108C, 108G}
320 GC, 320 and 323 Excavator Machine Systems Specifications Stick
Regulatory Compliance Information Product Link - PL641 - If Equipped
320 GC, 320 and 323 Excavator Oil Filter - Inspect
G3500H 50Hz Generator Sets Cylinder Pressure - Test/Record
320 GC, 320 and 323 Excavator Machine Systems Specifications Stick Cylinder
C9.3B Engines for Caterpillar Built Machines Speed/Timing Sensor - Remove and Install - Camshaft Speed/Timing Sensor
336 and 336 GC Excavator Camera - Clean
C27 and C32 Tier 4 Final Marine Engines Fuel Filter (Secondary)
320 GC, 320 and 323 Excavator Lifting Capacities - 320 GC Reach Boom
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.