320 GC, 320 and 323 Excavator Machine Systems Specifications Caterpillar

Stick Cylinder

Usage:

320 BR6

Show/hide table




Illustration 1	g02730787

Show/hide table

Table 1
Item	Qty	Part	Specification Description
1	1	240-2914 Bushing	Inside diameter before assembly is 80.20 ± 0.04 mm (3.157 ± 0.002 inch). Installation depth is 10 mm (0.4 inch).
2	12	4I-3628 Bolt	Torque to 367 ± 37 N·m (270 ± 27 lb ft).
A	1	526-8033 Stick Cylinder As	Bore diameter is 140 mm (5.5 inch).
B	1	495-1188 Rod As	Diameter is 100 mm (3.9 inch).
3	2	357-5711 Bushing	During press fit, insert the bushing on the side of the housing with the taper. Inside diameter before assembly is 80.32 ± 0.03 mm (3.162 ± 0.001 inch). Installation depth is 10 mm (0.4 inch).
4	1	3B-8489 Grease Fitting	Torque to 9.32 ± 0.49 N·m (82.49 ± 4.34 lb in).
5	1	096-5625 Bushing	Outside diameter before assembly is 105 mm (4.1 inch). Thickness is 2.47 mm (0.097 inch).
6	1	247-8873 Piston	Torque to 8890 ± 889 N·m (6557 ± 656 lb ft).
7	1	096-6210 Socket Setscrew	Torque to 56.9 ± 10.7 N·m (42.0 ± 7.9 lb ft). After tightening the socket setscrew, stake the socket setscrew in two places.

Caterpillar Information System:

G3500H 50Hz Generator Sets Cylinder Pressure - Test/Record

320 GC, 320 and 323 Excavator Oil Filter - Inspect

Regulatory Compliance Information Product Link - PL641 - If Equipped

320 GC, 320 and 323 Excavator Machine Systems Specifications Stick

A New NOx Reduction System Cooler Group Is Now Used on All C9.3 Tier 4 Interim Engines {108C, 108G} A New NOx Reduction System Cooler Group Is Now Used on All C9.3 Tier 4 Interim Engines {108C, 108G}

320, 323 Excavator Engine Supplement Electronic Control Module - Remove and Install

320GC Excavator Engine Supplement Fuel Filter and Base - Remove and Install - Secondary Fuel Filter

320 GC, 320 and 323 Excavator Seat Belt - Inspect

C9.3B Engines for Caterpillar Built Machines Fuel Pressure Sensor - Remove and Install

Regulatory Compliance Information Product Link - PL631 - If Equipped

320 GC, 320 and 323 Excavator Mounting and Dismounting

320 GC, 320 and 323 Excavator Windows - Clean

C9.3B Engines for Caterpillar Built Machines Speed/Timing Sensor - Remove and Install - Camshaft Speed/Timing Sensor

336 and 336 GC Excavator Camera - Clean

C27 and C32 Tier 4 Final Marine Engines Fuel Filter (Secondary)

320 GC, 320 and 323 Excavator Lifting Capacities - 320 GC Reach Boom

C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Cylinder Head - Remove

C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Cylinder Head - Remove

C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Cylinder Head - Install

C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Cylinder Head - Install

New Fuel Priming Instructions are Available for Certain 3126B Engines {1258, 1290} New Fuel Priming Instructions are Available for Certain 3126B Engines {1258, 1290}

C27 and C32 Tier 4 Final Marine Engines Fuel Filter Base

320 GC, 320 and 323 Excavator Machine Systems Specifications Bucket Cylinder

320 GC, 320 and 323 Excavator Machine Systems Specifications Bucket Cylinder