Stick
Show/hide table
Illustration 1 | g06054878 |
Typical example |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the bucket, and the cylinder pin bores. | |||
1 | - | - | Assemble the stick cylinder so that the grease zerk is directed, as shown. |
2 | 1 | 4I-4811 Pin As | Diameter is |
3 | 1 | 4I-4809 Pin As | Diameter is |
4 | 2 | 166-1495 Lip Type Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install lip type seals so that the lip type seals do not extend beyond the face of the boss. |
5 | 2 | 235-7679 Lip Type Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install lip type seals so that the lip type seals do not extend beyond the face of the boss. |
6 | 2 | 166-1494 Lip Type Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install lip type seals so that the lip type seals do not extend beyond the face of the boss. |
7 | 2 | 489-3008 Bushing (1) | Bore before assembly is Installation depth is |
8 | 2 | 514-7655 Bushing (1) | Bore before assembly is Installation depth is |
9 | 2 | 489-3010 Bushing (1) | Bore before assembly is Installation depth is |
Show/hide table
(1) | Assemble bearing so that end surface with groove faces the inside |
Caterpillar Information System:
A New NOx Reduction System Cooler Group Is Now Used on All C9.3 Tier 4 Interim Engines {108C, 108G} A New NOx Reduction System Cooler Group Is Now Used on All C9.3 Tier 4 Interim Engines {108C, 108G}
320, 323 Excavator Engine Supplement Electronic Control Module - Remove and Install
320GC Excavator Engine Supplement Fuel Filter and Base - Remove and Install - Secondary Fuel Filter
320 GC, 320 and 323 Excavator Seat Belt - Inspect
C9.3B Engines for Caterpillar Built Machines Fuel Pressure Sensor - Remove and Install
Regulatory Compliance Information Product Link - PL631 - If Equipped
320 GC, 320 and 323 Excavator Mounting and Dismounting
320 GC, 320 and 323 Excavator Windows - Clean
320, 323 Excavator Engine Supplement Refrigerant Condenser - Remove and Install
C175-16 Locomotive Engines Turbocharger - Inspect
C27 and C32 Tier 4 Final Marine Engines Fuel Filter Base
C27 and C32 Tier 4 Final Marine Engines Fan Drive
Regulatory Compliance Information Product Link - PL641 - If Equipped
320 GC, 320 and 323 Excavator Oil Filter - Inspect
G3500H 50Hz Generator Sets Cylinder Pressure - Test/Record
320 GC, 320 and 323 Excavator Machine Systems Specifications Stick Cylinder
C9.3B Engines for Caterpillar Built Machines Speed/Timing Sensor - Remove and Install - Camshaft Speed/Timing Sensor
336 and 336 GC Excavator Camera - Clean
C27 and C32 Tier 4 Final Marine Engines Fuel Filter (Secondary)
320 GC, 320 and 323 Excavator Lifting Capacities - 320 GC Reach Boom
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Cylinder Head - Remove
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Cylinder Head - Remove
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Cylinder Head - Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Cylinder Head - Install