An Improved Main Stator Slot Top Wedge Material Is Now Used on Certain G3520H Heavy-Duty Generator Sets {4450, 4453}
- Engine
- G3520H (S/N: GFR1-138)
Description Of Change: The improved top wedge material does not have magnetic properties and will not move or become displaced due to the magnetic forces resulting from generator operation.
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
The improvement has been made to the 461-4098 Generator Ar.
Caterpillar Information System:
New Radiator Fans Are Now Used on Certain 3508, 3512, and 3516 Generator Sets {1356, 1360} New Radiator Fans Are Now Used on Certain 3508, 3512, and 3516 Generator Sets {1356, 1360}
3512E Tier 4 Final Engines for Land Electric Drilling Fumes Disposal Filter
3512E Tier 4 Final Engines for Land Electric Drilling Turbocharger Speed Sensor
Electric Fuel Priming Pump on Certain 3054C and C4.4 (Mechanical) Engines {1258} Electric Fuel Priming Pump on Certain 3054C and C4.4 (Mechanical) Engines {1258}
XQP1100 Generator Set Product Lifting
XQP1100 Generator Set Product Installation
C9.3B Engines for Caterpillar Built Machines Engine Oil Pan - Install
A New Recommendation for Spacing the AC Sensing Harness Pins Is Now Used on Certain C13, C15, and C18 Engines {1000, 1404, 1408} A New Recommendation for Spacing the AC Sensing Harness Pins Is Now Used on Certain C13, C15, and C18 Engines {1000, 1404, 1408}
XQP1100 Generator Set Electronic Modular Control Panel 4 (EMCP 4) - EMCP 4.3/4.4
336 and 336 GC Excavator Boom/Stick/Bucket Combinations
320 GC, 320 and 323 Excavator Boom, Stick and Bucket Operation
3512E Tier 4 Final Engines for Land Electric Drilling Radiator
XQP1100 Generator Set Safety Messages
3512E Tier 4 Final Engines for Land Electric Drilling Event Codes
Incorrect Atmospheric Sensor and Ladder Clip Orientation May Cause Pin Breakage on Certain C11 and C13 Engines {1439} Incorrect Atmospheric Sensor and Ladder Clip Orientation May Cause Pin Breakage on Certain C11 and C13 Engines {1439}
C9.3B Engines for Caterpillar Built Machines Cylinder Liner - Remove
3512E Tier 4 Final Engines for Land Electric Drilling Solenoid Valve - Test
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700} Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
3512E Tier 4 Final Engines for Land Electric Drilling Prelubrication Pump Problem
320 GC, 320 and 323 Excavators Tool Control System General Information
320 GC, 320 and 323 Excavators Tool Control System Combined Function - Electric Relief
320 GC, 320 and 323 Excavators Tool Control System Combined Function - Manual Relief
G3516 Petroleum Engines Exhaust Manifold - Install
320 GC, 320 and 323 Excavators Tool Control System Medium Pressure Hydraulic System