New Radiator Fans Are Now Used on Certain 3508, 3512, and 3516 Generator Sets {1356, 1360}
- Electric Power Generation
- 3512 GEN SET (S/N: ZAF1-808)
- 3512B GENSET (S/N: ZAH1-1039,90000-92015; ZAJ1-284)
- 3516B GEN SET (S/N: ZAP1-2054)
- 3512B GENSET (S/N: ZAH1-1039,90000-92015; ZAJ1-284)
- Engine
- 3508B (S/N: CNB1-1767; ZAD1-208)
- 3512 (S/N: JM21-110; YBA1-448; CMJ1-1762,90000-92002; YAK1-960; YAX1-612)
- 3512B (S/N: JM31-110; JM41-102; LY81-168; LY91-99; YBB1-588; CMC1-1889,90000-92002; YBC1-148; BRK1-353; YAM1-997; YAN1-359,90000-92004; YAY1-1550,90000-92002; YAZ1-866)
- 3516 (S/N: JCG1-107; YAL1-719; ZAL1-1000; ZBL1-132; YAS1-1013; YBS1-217)
- 3516B (S/N: GD31-152; LY31-136; LY41-127; JCH1-145; JCN1-339; YAP1-858,90000-92027; ZBP1-306; YAR1-924; ZAR1-1052,90000-92035; ZBR1-289; YAT1-1033,90000-91008; YBT1-632; YAW1-1017; YBW1-260)
- 3512 (S/N: JM21-110; YBA1-448; CMJ1-1762,90000-92002; YAK1-960; YAX1-612)
Description Of Change: The new fan provides improved structural durability. The new fan hub has a spacer plate installed, and requires longer mounting bolts. Refer to Illustration 1.
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
The new 500-4803 Fan Spider As replaces the former 242-4251 Fan used in the 235-2324 Blower Fan Gp.
Tighten mounting bolts ...
Reference: Disassembly and Assembly, RENR5060 for the radiator fan disassembly and assembly instructions.The new and former parts for the 235-2324 Blower Fan Gp are listed in Table 1.
Show/hide table
| Qty | New Part Number | Part Description | Former Part Number |
|---|---|---|---|
| 6 | Bolt | ||
| 6 | Hard Washer | ||
| 1 | Fan Spider As |
Show/hide table
| |
| Illustration 1 | g06391390 |
| (1) Fan Hub | |
Caterpillar Information System:
3512E Tier 4 Final Engines for Land Electric Drilling Fumes Disposal Filter
3512E Tier 4 Final Engines for Land Electric Drilling Turbocharger Speed Sensor
Electric Fuel Priming Pump on Certain 3054C and C4.4 (Mechanical) Engines {1258} Electric Fuel Priming Pump on Certain 3054C and C4.4 (Mechanical) Engines {1258}
XQP1100 Generator Set Product Lifting
XQP1100 Generator Set Product Installation
C9.3B Engines for Caterpillar Built Machines Engine Oil Pan - Install
A New Recommendation for Spacing the AC Sensing Harness Pins Is Now Used on Certain C13, C15, and C18 Engines {1000, 1404, 1408} A New Recommendation for Spacing the AC Sensing Harness Pins Is Now Used on Certain C13, C15, and C18 Engines {1000, 1404, 1408}
XQP1100 Generator Set Electronic Modular Control Panel 4 (EMCP 4) - EMCP 4.3/4.4
336 and 336 GC Excavator Boom/Stick/Bucket Combinations
320 GC, 320 and 323 Excavator Boom, Stick and Bucket Operation
3512E Tier 4 Final Engines for Land Electric Drilling Radiator
320 GC, 320 and 323 Excavator Travel in Water and Mud
An Improved Main Stator Slot Top Wedge Material Is Now Used on Certain G3520H Heavy-Duty Generator Sets {4450, 4453} An Improved Main Stator Slot Top Wedge Material Is Now Used on Certain G3520H Heavy-Duty Generator Sets {4450, 4453}
XQP1100 Generator Set Safety Messages
3512E Tier 4 Final Engines for Land Electric Drilling Event Codes
Incorrect Atmospheric Sensor and Ladder Clip Orientation May Cause Pin Breakage on Certain C11 and C13 Engines {1439} Incorrect Atmospheric Sensor and Ladder Clip Orientation May Cause Pin Breakage on Certain C11 and C13 Engines {1439}
C9.3B Engines for Caterpillar Built Machines Cylinder Liner - Remove
3512E Tier 4 Final Engines for Land Electric Drilling Solenoid Valve - Test
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700} Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
3512E Tier 4 Final Engines for Land Electric Drilling Prelubrication Pump Problem
320 GC, 320 and 323 Excavators Tool Control System General Information
320 GC, 320 and 323 Excavators Tool Control System Combined Function - Electric Relief
320 GC, 320 and 323 Excavators Tool Control System Combined Function - Manual Relief
G3516 Petroleum Engines Exhaust Manifold - Install