New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage
Usage:
All 3408 And 3412 Engines
Description of Change: A new seal is used in the fuel injection lines group. This seal is used on the end of the fuel injection pump housing, where it fits into the front gear housing of the engine. The new seal gives increased temperature resistance. This will help reduce the formation of heat cracks in the seal. For identification, the new seal is brown; the former seal was black.
Adaptable As: The new 6V4314 Seal is a direct replacement for the former 8J1688 Seal.
Caterpillar Information System:
1984/05/16 New Recommendation For Oil Hole Location During Installation Of Camshaft Bearings
1984/05/16 Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators
1984/05/16 New Hoses In Water Lines Group Give Better Performance At Higher Temperatures; New Hose Clamps Also Used
1984/05/16 High Levels Of Soot In The Oil; Make Sure Air Fuel Ratio Control Operates Correctly
1984/05/16 Gasket Changed For Cylinder Block Side Cover
1984/05/16 How To Recognize And Reduce The Effect Of Moisture On SR4 Generator Windings
1984/05/16 Correct Oil Level And End Play Settings For Marine Transmission
1984/05/16 Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1984/04/11 Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines
1984/04/11 Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing
1984/04/11 Overvoltage Protection For Woodward 2301 Governor
1984/04/11 Check Cylinder Heads For Water Passage Plugs
1984/05/16 New Valve Assembly And Seal Used In Fuel Transfer Pump
1984/06/20 New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage
1984/06/20 Borescope And Light Source Available For Internal Inspection Of Passages On Most Caterpillar Products
1984/06/20 Improved Valve Used In Air Starting Lines Groups
1984/06/20 New Bearing Race Is Used On The Auxiliary Drive
1984/06/20 New Air Start And Override Valve Has Stronger Mounting
1984/06/20 Changes Made To Air Shutoff And Rack Shutoff Groups
1984/06/20 List Of Service Publications
1984/06/20 New Pulley Group With Tapered Bearings
1984/06/20 Improved Cylinder Head Gasket
1984/06/20 Different Thread Lubricant Can Be Used On Connecting Rod And Counterweight Bolts
1984/06/20 New Cylinder Head Has Larger Mounting Holes For The Lifting Brackets