Hydraulic Track Adjusters - Assemble
参考: 专门说明书, "目视维修步骤 - 颜色和符号" , M0066576。
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 1P-0520 | 冲头总成 | 1 |
| B | 5p-0960 | 含钼润滑脂 | - |
注: 组装之前，请确保液压履带调节器的所有零件干净并且没有尘土和碎屑。
- 确保活塞组件中的所有油道都注满工具 (B)。 确保没有空气残留在活塞组件的油道中。
Show/hide table
| |
| 图 1 | g06191230 |
Show/hide table
| |
| 图 2 | g06191234 |
注: 使用工具 (B) 完全注满活塞组件的密封凹槽。 当安装 O 形密封圈和备用环时，润滑脂将排出空气。
注: 必须将 O 形密封圈和支承环安装到正确位置，以确保液压履带调整器的正常工作。 支承环是根据环的颜色加以区分。 支承环 (1) 为黑色。 支承环 (2) 为棕色。
Show/hide table
| |
| 图 3 | g06191236 |
注: 在油缸的 O 形密封圈和支承环的密封槽中加满工具 (B)。 O 形圈和支承环安装完成时，润滑脂会排出空气。
Show/hide table
| |
| 图 4 | g06191237 |
安装唇形密封，直到密封件到达油缸表面下方
Show/hide table
| |
| 图 5 | g06191238 |
Show/hide table
| |
| 图 6 | g06191239 |
Show/hide table
| |
| 图 7 | g06191240 |
将少量工具 (B) 涂抹在活塞组件的滑动表面。 将至少
注: 可能需要利用软锤将活塞组件安装到油缸内。
Show/hide table
| |
| 图 8 | g06191241 |
向加注阀中添加大约
结束:
- 组装反冲弹簧。
Caterpillar Information System:
320GC, 320 and 323 Excavators Machine Systems Hydraulic Track Adjusters - Disassemble
320GC, 320 and 323 Excavators Machine Systems Final Drive - Remove and Install
320GC, 320 and 323 Excavators Machine Systems Sprocket - Remove and Install
3512B SR4B Generator Sets Product Description
Steel Cable Strap May Damage the Temperature Sensor Wires on Certain Tier 4 Final Engines {1408, 1900} Steel Cable Strap May Damage the Temperature Sensor Wires on Certain Tier 4 Final Engines {1408, 1900}
3512B HD SR500 Generator Sets Maintenance Interval Schedule
New Exhaust Bypass Valve and Soft Exhaust Shields Used on C280-16 T4 Front Mount Turbo Units {1052, 1057, 1059} New Exhaust Bypass Valve and Soft Exhaust Shields Used on C280-16 T4 Front Mount Turbo Units {1052, 1057, 1059}
A New Turbocharge Heat Shield Group is Now Used for Certain 3512C and 3516C Engines {1052, 1073} A New Turbocharge Heat Shield Group is Now Used for Certain 3512C and 3516C Engines {1052, 1073}
3500B Generator Sets Generator Bearing - Inspect
New Exhaust Heat Shields Are Now Used on Certain 3500C Series Engines {1063, 1067} New Exhaust Heat Shields Are Now Used on Certain 3500C Series Engines {1063, 1067}
C175 Tier 4 Final Engines for Off-Highway Trucks Coolant Temperature Is Low
An Improved Monitor Display Group Is Now Used on Certain C32 Marine Engines {7490} An Improved Monitor Display Group Is Now Used on Certain C32 Marine Engines {7490}
320 GC, 320 and 323 Excavator Machine Systems Electronic Control (Machine System)
320 GC, 320 and 323 Excavator Shovel Crane - Inspect - If Equipped
C175 Tier 4 Final Engines for Caterpillar Built Machines Vibration Damper - Remove and Install
349F and 352F Excavators Machine System Specifications Mounting Frame
Radiator Protection Screen for C4.4 Engines {1353} Radiator Protection Screen for C4.4 Engines {1353}
320GC, 320 and 323 Excavators Machine Systems Final Drive and Travel Motor - Remove and Install
349F and 352F Excavators Machine System Specifications Main Control Valve
3512B Generator Set Engines with Dynamic Gas Blending Speed Control - Test
320 GC, 320 and 323 Excavator Shovel Crane Operation
320 GC, 320 and 323 Excavator Shovel Crane - Lubricate - If Equipped
793F Off-Highway Truck Diesel Exhaust Fluid Tank - Flush - Emission Related Component
330 GC and 330 Excavator Boom and Stick Linkage - Lubricate - VA Boom (If Equipped)