Specifications
CX38–P892 Petroleum Transmission
Show/hide table
| |
| Illustration 1 | g06162345 |
Show/hide table
| CX38-P892 Petroleum Transmission | |
| Approximate Weight | |
| Overall Height (A) | |
| Overall Width (B) | |
| Overall Length (C) | |
| Length of Drive Train (D) | |
| Length to Crankshaft Mount (E) | |
CX38–P892 Petroleum Transmission With Integral Pump Drives
Show/hide table
| |
| Illustration 2 | g06162421 |
Show/hide table
| CX38-P892 Petroleum Transmission | |
| Approximate Weight | |
| Overall Height (A) | |
| Overall Width (B) | |
| Overall Length (C) | |
| Length of Drive Train (D) | |
| Length to Crankshaft Mount (E) | |
Caterpillar Information System:
C175 Tier 4 Final Engines for Off-Highway Trucks DEF Pressure Is Low
CX38-P892 Well Servicing Transmission Safety Messages
C9.3B Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
G3516 Petroleum Engines Cylinder Head - Install
C9.3B Engines for Caterpillar Built Machines Air Compressor - Remove and Install
C9.3B Engines for Caterpillar Built Machines Alternator - Remove and Install
CX38-P892 Well Servicing Transmission Determining Diagnostic Codes
CX38-P892 Well Servicing Transmission Diagnostic Code List
CX38-P892 Well Servicing Transmission Replaced Relay or Solenoid Does Not Operate
CX38-P892 Well Servicing Transmission Transmission Does Not Respond to Shift Selector
CX38-P892 Well Servicing Transmission Transmission Does Not Automatically Shift Back Into Gear
CX38-P892 Well Servicing Transmission Transmission Does Not Automatically Shift Into Neutral
New Injector Wiring Harnesses Are Now Used on Certain C15 and C18 Engines {1290, 1408} New Injector Wiring Harnesses Are Now Used on Certain C15 and C18 Engines {1290, 1408}
C175 Generator Sets Engine Oil and Filter - Change
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408} 2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408}
CX38-P892 Well Servicing Transmission Plate Locations and Film Locations
C9.3B Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
CX38-P892 Well Servicing Transmission Breather (Transmission) - Clean
CX38-P892 Well Servicing Transmission Oil Filter (Transmission) - Replace
New Turbocharger Shaft Seal is Used on Certain C175-16 Locomotive Engine {1052, 1053} New Turbocharger Shaft Seal is Used on Certain C175-16 Locomotive Engine {1052, 1053}
CX38-P892 Well Servicing Transmission Transmission Oil - Change
CX38-P892 Well Servicing Transmission Transmission Oil Level - Check
CX38-P892 Well Servicing Transmission Transmission Oil Sample - Obtain
XQP500 Generator Sets Fuel System Secondary Filter - Replace