Safety Messages
Show/hide table
 |
|
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in serious injury or death. |
Show/hide table
| |
| Illustration 1 | g00934493 |
Show/hide table
| |
| Illustration 2 | g06162087 |
|
Top View (Standard) (1) Universal Warning Film | |
Show/hide table
| |
| Illustration 3 | g06162282 |
|
Top View (Integral Pump Drive) (1) Universal Warning Film | |
The OEM builder may add more warning decals to a transmission that will be installed in a more visible locations.
Caterpillar Information System:
C9.3B Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
G3516 Petroleum Engines Cylinder Head - Install
C9.3B Engines for Caterpillar Built Machines Air Compressor - Remove and Install
C9.3B Engines for Caterpillar Built Machines Alternator - Remove and Install
CX38-P892 Well Servicing Transmission Determining Diagnostic Codes
CX38-P892 Well Servicing Transmission Diagnostic Code List
CX38-P892 Well Servicing Transmission Replaced Relay or Solenoid Does Not Operate
CX38-P892 Well Servicing Transmission Transmission Does Not Respond to Shift Selector
CX38-P892 Well Servicing Transmission Transmission Does Not Automatically Shift Back Into Gear
CX38-P892 Well Servicing Transmission Transmission Does Not Automatically Shift Into Neutral
G3516 Petroleum Engines Cylinder Head - Remove
3516B Generator Set Engines with Dynamic Gas Blending Engine Monitoring System
C175 Tier 4 Final Engines for Off-Highway Trucks DEF Pressure Is Low
CX38-P892 Well Servicing Transmission Specifications
New Injector Wiring Harnesses Are Now Used on Certain C15 and C18 Engines {1290, 1408} New Injector Wiring Harnesses Are Now Used on Certain C15 and C18 Engines {1290, 1408}
C175 Generator Sets Engine Oil and Filter - Change
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408} 2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408}
CX38-P892 Well Servicing Transmission Plate Locations and Film Locations
C9.3B Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
CX38-P892 Well Servicing Transmission Breather (Transmission) - Clean
CX38-P892 Well Servicing Transmission Oil Filter (Transmission) - Replace
New Turbocharger Shaft Seal is Used on Certain C175-16 Locomotive Engine {1052, 1053} New Turbocharger Shaft Seal is Used on Certain C175-16 Locomotive Engine {1052, 1053}
CX38-P892 Well Servicing Transmission Transmission Oil - Change
CX38-P892 Well Servicing Transmission Transmission Oil Level - Check