Codes that Inhibit Operation of Aftertreatment System
The following tables list the codes that inhibit the aftertreatment system either during the current key cycle or through successive key cycles.
Show/hide table
Codes That Clear With Each Key Cycle | |||
---|---|---|---|
J1939 Code | CDL Code | Customer Action | Clearing Conditions |
102-16 | E1044 (2) | Cycle key OFF for 2 minutes and then run engine per Clearing Conditions | Engine Speed >1400/1500 RPM |
102-18 | E1045 (2) | Cycle key OFF for 2 minutes and then run engine per Clearing Conditions | Engine Speed >1400/1500 RPM |
105-3 | 172-3 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
105-4 | 172-4 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
108-3 | 274-3 | Cycle key OFF for 30s then key ON | Circuit Check (Auto) |
108-4 | 274-4 | Cycle key OFF for 30s then key ON | Circuit Check (Auto) |
108-13 | 274-13 | Cycle key OFF for 30s then key ON | Circuit Check (Auto) |
110-0 | E361 (3) | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
110-3 | 110-3 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
110-4 | 110-4 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
110-15 | E361 (1) | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
110-16 | E361 (2) | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
157-3 | 1797-3 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
157-4 | 1797-4 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
157-16 | E396 (2) | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
157-18 | E398 (2) | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
168-2 | 168-2 | Cycle key OFF for 30s then START engine | Run engine > 3 Seconds |
168-3 | 168-3 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
168-4 | 168-4 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
172-3 | 2526-3 | Cycle key OFF for 30s then key ON | Circuit Check (Auto) |
172-4 | 2526-4 | Cycle key OFF for 30s then key ON | Circuit Check (Auto) |
174-16 | E363 (2) | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
651-2 | 1-2 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
651-5 | 1-5 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
651-6 | 1-6 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
652-2 | 2-2 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
652-5 | 2-5 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
652-6 | 2-6 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
653-2 | 3-2 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
653-5 | 3-5 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
653-6 | 3-6 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
654-2 | 4-2 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
654-5 | 4-5 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
654-6 | 4-6 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
655-2 | 5-2 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
655-5 | 5-5 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
655-6 | 5-6 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
656-2 | 6-2 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
656-5 | 6-5 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
656-6 | 6-6 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
1188-5 | 526-5 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
1188-6 | 526-6 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
1239-0 | E499 (3) | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
2791-6 | 3405-6 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
2791-7 | E1121 (2) | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
3241-3 | 3485-3 | Cycle key OFF for 30s then key ON | Circuit Check (Auto) |
3241-4 | 3485-4 | Cycle key OFF for 30s then key ON | Circuit Check (Auto) |
3242-3 | 2452-3 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
3242-4 | 2452-4 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
3358-3 | 3385-3 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
3358-4 | 3385-4 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
3358-13 | 3385-13 | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
3479-5 | 2461-5 | Cycle key OFF for 30s then START engine and perform a Forced Regeneration | Successful Forced Regeneration |
3479-6 | 2461-6 | Cycle key OFF for 30s then START engine and perform a Forced Regeneration | Successful Forced Regeneration |
3480-3 | 2460-3 | Cycle key OFF for 30s then key ON | Circuit Check (Auto) |
3480-4 | 2460-4 | Cycle key OFF for 30s then key ON | Circuit Check (Auto) |
3487-5 | 2489-5 | Cycle key OFF for 30s then key ON | Circuit Check (Auto) |
3487-6 | 2489-6 | Cycle key OFF for 30s then key ON | Circuit Check (Auto) |
3487-7 | 2489-7 | Cycle key OFF for 30s then key ON | Circuit Check (Auto) |
3563-3 | 1785-3 | Cycle key OFF for 30s then key ON | Circuit Check (Auto) |
3563-4 | 1785-4 | Cycle key OFF for 30s then key ON | Circuit Check (Auto) |
3609-13 | 3464-13 | Cycle key OFF for 30s then key ON | Circuit Check (Auto) |
3837-13 | 3493-13 | Cycle key OFF for 30s then key ON | Circuit Check (Auto) |
5423-5 | 3427-5 | Cycle key OFF for 30s then key ON | Circuit Check (Auto) |
5423-6 | 3427-6 | Cycle key OFF for 30s then START engine and perform a Forced Regeneration | Successful Forced Regeneration |
5571-0 | E1264 (2) | Cycle key OFF for 2 minutes then key ON | Circuit Check (Auto) |
Show/hide table
Codes That Stay Active Through Key Cycles | |||
---|---|---|---|
J1939 Codes | CDL Codes | Customer Action | Clearing Conditions |
27-3 | 3407-3 | Cycle key OFF for 2 minutes and then run engine per Clearing Conditions | Rectification completed and NRS system operating OK. |
27-4 | 3407-4 | Cycle key OFF for 2 minutes and then run engine per Clearing Conditions | Rectification completed and NRS system operating OK. |
108-21 | 274-21 | Cycle key OFF for 30s then key ON | Circuit Check (Auto) |
2791-5 | 3405-5 | Code must be cleared with the electronic service tool | The electronic service tool is required. |
3473-31 | E1025 (2) | Cycle key OFF for 30s then START engine and perform a Forced Regeneration | Successful Forced Regeneration |
3474-14 | E1026 (1) | Cycle key OFF for 30s then START engine and perform a Forced Regeneration | Successful Forced Regeneration |
3474-31 | E1026 (2) | Cycle key OFF for 30s then START engine and perform a Forced Regeneration | Successful Forced Regeneration |
3480-16 | E1050 (2) | Service is required, contact local Caterpillar ® dealership | Troubleshooting procedure and Caterpillar® Electronic Technician (Cat ET) Service Test Required |
3480-18 | E1052 (2) | Service is required, contact local Caterpillar ® dealership | Troubleshooting procedure and Caterpillar® Electronic Technician (Cat ET) Service Test Required |
3488-3 | 2490-3 | Cycle key OFF for 30s then key ON | Circuit Check (Auto) |
3488-4 | 2490-4 | Cycle key OFF for 30s then key ON | Circuit Check (Auto) |
3609-18 | E1154 (2) | Cycle key OFF for 30s then START engine and IDLE engine for 30 seconds | Run engine > 30 Seconds |
3703-31 | E993 (2) | Inhibit Switch is Preventing Regeneration | Allow Regeneration |
3711-31 | E593 (2) | Cycle key OFF for 30s then START engine and perform a Forced Regeneration | Successful Forced Regeneration |
3714-31 | E992 (3) | Cycle key OFF for 30s then START engine and perform a Forced Regeneration | Successful Forced Regeneration |
3715-31 | E991 (3) | Service is required, contact local Caterpillar ® dealership | Troubleshooting procedure and Caterpillar® Electronic Technician (Cat ET) Service Test Required |
3837-3 | 3493-3 | Cycle key OFF for 30s then key ON | Circuit Check (Auto) |
3837-4 | 3493-4 | Cycle key OFF for 30s then key ON | Circuit Check (Auto) |
3837-21 | 3493-21 | Cycle key OFF for 30s then key ON | Circuit Check (Auto) |
Caterpillar Information System:
C7.1 Engines and Generator Sets Electronic Service Tool Does Not Communicate
C7.1 Engines and Generator Sets ECM Will Not Accept Factory Passwords
C7.1 Engines and Generator Sets Factory Passwords
C7.1 Engines and Generator Sets Customer Passwords
C9.3B Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
G3516 Petroleum Engine Manual Stop Procedure
G3516 Petroleum Engine Engine Operation
3512E and 3516E Marine Engines Pistons and Connecting Rods - Install
G3516 Petroleum Engine After Starting Engine
G3516 Petroleum Engine Starting the Engine
C7.1 Engines and Generator Sets Water in Fuel - Test
G3516 Petroleum Engine Cold Weather Starting
C7.1 Engines and Generator Sets Test ECM Mode
C7.1 Engines and Generator Sets Injector Code - Calibrate
C7.1 Engines and Generator Sets ECM Software - Install
C7.1 Engines and Generator Sets ECM - Replace
C7.1 Engines and Generator Sets Electrical Connectors - Inspect
C7.1 Engines and Generator Sets Cooling Fan - Calibrate
3516E Engines for 793D Off-Highway Trucks Turbocharger Turbine Temperature Is High
C3.3B and C3.8 Engines for Caterpillar Built Machines Solenoid Valve - Test - Solenoid Valves that Connect to the Dosing Control Unit (DCU)
C3.3B and C3.8 Engines for Caterpillar Built Machines Solenoid Valve - Test - Pressure Relief Valve
G3516 Petroleum Engine Engine Oil and Filter - Change
A New Stub Shaft Is Available for 3500 Commercial Engines {1359} A New Stub Shaft Is Available for 3500 Commercial Engines {1359}
C175 Tier 4 Final Engines for Caterpillar Built Machines Pressure Sensor (Exhaust Inlet) - Remove and Install