After Starting Engine
对于新安装发动机或新翻修发动机，要仔细监控发动机，以检测出任何异常的发动机性能。
所有系统都稳定且正常后，发动机转速可由低怠速转速提高到额定转速。
在高怠速下，负载缓升限制为每秒 4%。 如果处于调低速度下，则负载缓升限制为每秒 1%。
可能需要施加负载，以达到正常工作温度。
Caterpillar Information System:
G3516 Petroleum Engine Starting the Engine
C7.1 Engines and Generator Sets Water in Fuel - Test
G3516 Petroleum Engine Cold Weather Starting
Installation of G610 Hardware for Cat® Terrain v6.0 for Excavators {7490} Installation of G610 Hardware for Cat® Terrain v6.0 for Excavators {7490}
C7.1 Engines and Generator Sets Valve Position - Test
G3516 Petroleum Engine Configuration Parameters
C7.1 Engines and Generator Sets Throttle Lock - Test
C7.1 Engines and Generator Sets Switch Circuits - Test - Multiposition Throttle Switch
797F and 797F XQ Off-Highway Trucks Machine Systems Brake Accumulator (Parking, Service) - Assemble
797F and 797F XQ Off-Highway Trucks Machine Systems Brake Accumulator (Parking, Service) - Disassemble
A New Heated Insulation Kit Is Now Available for Open Crankcase Ventilation Systems on Certain C15 and C18 Generator Set Engines {1317} A New Heated Insulation Kit Is Now Available for Open Crankcase Ventilation Systems on Certain C15 and C18 Generator Set Engines {1317}
C7.1 Engines and Generator Sets Speed/Timing - Test
3512E and 3516E Marine Engines Pistons and Connecting Rods - Install
G3516 Petroleum Engine Engine Operation
G3516 Petroleum Engine Manual Stop Procedure
C9.3B Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
C7.1 Engines and Generator Sets Customer Passwords
C7.1 Engines and Generator Sets Factory Passwords
C7.1 Engines and Generator Sets ECM Will Not Accept Factory Passwords
C7.1 Engines and Generator Sets Electronic Service Tool Does Not Communicate
C7.1 Engines and Generator Sets Codes that Inhibit Operation of Aftertreatment System
C7.1 Engines and Generator Sets Test ECM Mode
C7.1 Engines and Generator Sets Injector Code - Calibrate
C7.1 Engines and Generator Sets ECM Software - Install