New By-pass Valve Actuators Are Now Used on Certain G3500 Engines {1078, 5510}
- Engine
- G3508B (S/N: N8C1-123; RBK1-1627)
- G3512B (S/N: JHH1-1047; N2S1-102)
- G3516B (S/N: N6E1-399; JEF1-3427)
- G3520B (S/N: GLF1-1112)
- G3512B (S/N: JHH1-1047; N2S1-102)
- Petroleum Engine
- G3520B PETROLEUM (S/N: TPC1-1190)
Description Of Change: The new by-pass valve actuators communicate on the J1939 data link.
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
The new by-pass valve actuators are adaptable to the above engines back to first production.
The new, reman, and former by-pass actuators are listed in Table 1.
Show/hide table
Size | New Part Number | Reman Part Number | Former Part Number |
---|---|---|---|
60 MM | |||
48 MM |
Show/hide table
Qty | Part Number | Part Name |
---|---|---|
1 | Cable Strap | |
2 | Cable Strap | |
2 | Seal Plug | |
2 | Gasket | |
2 | Seal | |
1 | Connecting Plug Kit | |
1 | Seal Cap |
Caterpillar Information System:
C4.4 Marine Generator Set Control Panel - Premium Control Panel, and MCS Control Panel
C4.4 Marine Generator Set Control Panel - Protection and Paralleling Unit (PPU) Control Panel (if equipped)
C4.4 Marine Generator Set Plate Locations and Film Locations
C4.4 Marine Generator Set Model View Illustrations
G3512 Generator Set Engine Exhaust Elbow - Remove and Install
C4.4 Marine Generator Set Safety Messages
PS097S and PS104S POWER SYSTEMS Machine Systems Wheel and Mounting
PS097S and PS104S POWER SYSTEMS Machine Systems Pump Drive
3512E and 3516E Marine Engines Nitrogen Oxide Sensor (Exhaust Outlet) - Remove and Install
C175-16 Locomotive Engines Fuel System Primary Filter/Water Separator - Clean/Replace
PS097S and PS104S POWER SYSTEMS Machine Systems Electric Motor (Hydraulic Pump)
C175-16 Locomotive Engines Maintenance Recommendations
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Diesel Particulate Filter Active Regeneration Occurrence Is Excessive
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Cranks but Does Not Start
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Does Not Crank
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Has Early Wear
Improved Wiring Harnesses Are Now Used on Certain Engines {1120, 1408, 1900} Improved Wiring Harnesses Are Now Used on Certain Engines {1120, 1408, 1900}
Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900} Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900}
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Has Mechanical Noise (Knock)
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Data Link - Test
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Electrical Power Supply - Test
C9.3 Tier 4 Final Engines Diesel Exhaust Fluid Lines
G3516 Petroleum Engines Exhaust Bypass Valve - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems Washdown Hose Reel - Remove and Install - High Pressure