Washdown Hose Reel - Remove and Install - High Pressure
- Disconnect hose assembly (1).
Show/hide table
Illustration 2 g06116278 - Remove four bolts (2). Remove high-pressure washdown hose reel (3).
Show/hide table
Illustration 3 g06116280 - Remove four bolts (5). Remove plate (4) from high-pressure washdown reel (3).
Show/hide table
| |
| Illustration 1 | g06116275 |
- Install high-pressure washdown reel (3) in the reverse order of removal.
Caterpillar Information System:
G3516 Petroleum Engines Exhaust Bypass Valve - Remove and Install
C9.3 Tier 4 Final Engines Diesel Exhaust Fluid Lines
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Electrical Power Supply - Test
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Data Link - Test
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Has Mechanical Noise (Knock)
Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900} Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900}
Improved Wiring Harnesses Are Now Used on Certain Engines {1120, 1408, 1900} Improved Wiring Harnesses Are Now Used on Certain Engines {1120, 1408, 1900}
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Has Early Wear
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Does Not Crank
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Cranks but Does Not Start
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Diesel Particulate Filter Active Regeneration Occurrence Is Excessive
New By-pass Valve Actuators Are Now Used on Certain G3500 Engines {1078, 5510} New By-pass Valve Actuators Are Now Used on Certain G3500 Engines {1078, 5510}
C175 Oil&Gas Offshore Engine Fuel Pressure Is High
C175 Oil&Gas Offshore Engine Fuel Pressure Is Low
The 356-5379 Alarm Module Gp May Fail on Certain Cat® Commercial Engines {7400} The 356-5379 Alarm Module Gp May Fail on Certain Cat® Commercial Engines {7400}
C4.4 Marine Generator Set Circuit Breakers - Reset
C4.4 Marine Generator Set Engine Crankcase Breather - Replace
374F Excavator Fuel Transfer Pump (Refueling) - If Equipped
G3512 Generator Set Engine Exhaust Manifold - Remove
PM820, PM822, and PM825 Cold Planer Machine Systems Washdown Hose Reel - Remove and Install - Low Pressure
PM820, PM822, and PM825 Cold Planer Machine Systems Blower Fan - Remove and Install - Conveyor Fumes Extractor
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder - Remove and Install - Left Antislab
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder - Remove and Install - Right Antislab
PM-620 and PM-622 Cold Planer Engine Supplement Alternator - Remove and Install