Use 6V7777 Spacer With 9S6030 Front Oil Seal Installer
Usage:
All 3100 Series Engines
A 6V7777 Spacer is now used in the 9S6030 Front Oil Seal Installer Assembly for the above engines. The new 6V7777 Spacer is flatter than the former spacer. This will permit the front seal to be installed with more accuracy.
Formerly, the 9S6012 Spacer was used in this application.
Caterpillar Information System:
1983/04/27 Labyrinth-Type Seal Ring Available For Rear Power Takeoff
1983/04/27 Use Of 9S3265 Retaining Compound On AiResearch Turbocharger Compressor Wheel Retainer Nuts
1983/04/27 Oil Passage Plugs Are No Longer Installed In Crankshafts For Parts Service
1983/04/27 Balancer Shaft And Gear Now Available Separately
1983/04/27 New Washer And Bolts Keep Fan Drive Tight
1983/04/27 New Specifications For Installation Of Crankshaft Counterweight Bolts
1983/04/27 Valve Spring Retainers Now Have Thicker Flanges
1983/04/27 Change 6V3060 EGR Testers To LES Testers
1983/04/27 Improved Valve Springs Available
1983/04/27 New Gasket And Cover Used On Governors
1983/04/27 Remove Plastic Plug From Fuel Transfer Pump
1983/04/27 New Special Instruction Available For 6V4135 Halogen Leak Detector
1983/04/27 Installation Of Bearing For Connecting Rod Piston Pin
1983/04/27 New Reconditioning Specifications For Cylinders Decrease Piston Scuffing And Seizure
1983/04/27 New Turbocharger Has Thicker Mounting Flange To Prevent Breakage
1983/04/27 New Gasket Prevents Leakage
1983/04/27 New Connecting Rod Bearings Used
1983/05/25 Double Lip Crankshaft Seal Helps Stop Oil Leakage
1983/05/25 Use The 6V4930 Battery Load Tester To Test Batteries
1983/05/25 New Fuel Setting Information
1983/05/25 List Of Service Publications
1983/05/25 Reuse Of Engine Bearings
1983/05/25 Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25 New Piston Ring Group Used