1983/04/27 Caterpillar


Change 6V3060 EGR Testers To LES Testers

Usage:


6V3060 Exhaust Gas Recirculation (EGR) Testers must be changed to 6V3060 Low Emission System (LES) Testers. You will need new labels to make this change.

The 6V3060 LES Tester tests 3208 Engines with LES Systems. It can also be used to test engines with EGR Systems. The tester will check the two piece cover and control on the LES System or the one piece cover on the EGR System. Other components in these systems are tested by visual inspection or other methods.

The new labels needed to make this change are shown in the chart.

See Special Instruction Form SEHS7808-01 for more information on how to use the 6V3060 LES Tester.


6V3060 LES Tester.

Caterpillar Information System:

1983/04/27 Improved Valve Springs Available
1983/04/27 New Gasket And Cover Used On Governors
1983/04/27 Remove Plastic Plug From Fuel Transfer Pump
1983/04/27 New Special Instruction Available For 6V4135 Halogen Leak Detector
1983/04/27 Pistons With Thicker Top Rings Must Be Used In Correct Applications
1983/04/27 Changes To Valve Clearance Settings
1983/04/27 New Shutoff Solenoid Group Used
1983/04/27 8S1603 Socket Group For Use On Bolts With 12 Point Heads
1983/04/27 List Of Service Publications
1983/04/27 Use The 6V5000 Infrared Thermometer Group To Measure Temperatures
1983/03/16 "Gas Engine Application And Installation Guide" Now Available
1983/03/16 Use FT1783 Fixture To Drill Vent Holes In Impeller
1983/04/27 Valve Spring Retainers Now Have Thicker Flanges
1983/04/27 New Specifications For Installation Of Crankshaft Counterweight Bolts
1983/04/27 New Washer And Bolts Keep Fan Drive Tight
1983/04/27 Balancer Shaft And Gear Now Available Separately
1983/04/27 Oil Passage Plugs Are No Longer Installed In Crankshafts For Parts Service
1983/04/27 Use Of 9S3265 Retaining Compound On AiResearch Turbocharger Compressor Wheel Retainer Nuts
1983/04/27 Labyrinth-Type Seal Ring Available For Rear Power Takeoff
1983/04/27 Use 6V7777 Spacer With 9S6030 Front Oil Seal Installer
1983/04/27 Installation Of Bearing For Connecting Rod Piston Pin
1983/04/27 New Reconditioning Specifications For Cylinders Decrease Piston Scuffing And Seizure
1983/04/27 New Turbocharger Has Thicker Mounting Flange To Prevent Breakage
1983/04/27 New Gasket Prevents Leakage
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.