Crankcase Breather - Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
When disconnecting and connecting the plastic tube assemblies for the crankcase breather system, the plastic tube assemblies should not be twisted. Twisting of the plastic tube assemblies will result in the seals being damaged. Damaged to seals will result in leakage. |
- Ensure that all components of the crankcase breather are clean and free from damage. Replace any components that are damaged.
Show/hide table
Illustration 1 g06141484 - Install crankcase breather (4) and bolts (5).
Show/hide table
Illustration 2 g06141470 - Connect hoses (1), (2), and (3).
Caterpillar Information System:
A New Water Pump Is Now Used For Certain 3500 And G3500 Engines {1361} A New Water Pump Is Now Used For Certain 3500 And G3500 Engines {1361}
3516E Engines Turbocharger - Remove
New Software Is Now Used on Certain C9 Truck Engines {1920} New Software Is Now Used on Certain C9 Truck Engines {1920}
A New Electronic Control Module Wash Out Process {1901, 1920} A New Electronic Control Module Wash Out Process {1901, 1920}
3516E Engines Camshaft - Install
C175-16 Locomotive Engine Starting - Test
C7.1 Marine Engine Gear Group (Front) - Remove
C175-16 Locomotive Engine Intake Manifold Air Temperature Is High
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Maintenance Interval Schedule
C175-20 Tier 4 Final Locomotive Engines Fastener Group (Vibration Damper)
C175-20 Tier 4 Final Locomotive Engines Diesel Exhaust Fluid Tank
C175-20 Tier 4 Final Locomotive Engines Fumes Disposal Group
PG145 Transmission Transmission Pressures - Test and Adjust
3516E Engines Turbocharger - Install
XQP500 Generator Sets Refill Capacities
C175-16 and C175-20 Locomotive Engines Connecting Rod Bearings - Remove and Install
PG145 Transmission Solenoid Valve - Test
3516E Engines Turbocharger - Disassemble
C175-16 and C175-20 Locomotive Engines Pistons, Liners, and Connecting Rods - Install
3516E Engines Turbocharger - Assemble
3516E Engines Inlet and Exhaust Valve Springs - Remove and Install
PG145 Transmission General Troubleshooting Information
PG145 Transmission Visual Inspection
PG145 Transmission Operational Checks