Relief Valve (Torque Converter Outlet) - Remove and Install
Start By:
- Release the hydraulic system pressure.
Show/hide table
Personal injury can result from hydraulic oil pressure and hot oil. Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system. Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. |
- Remove three bolts (1) and remove relief valve (2).
Show/hide table
Illustration 1 | g06067030 |
- Install relief valve (2) in the reverse order of removal.
Caterpillar Information System:
Selective Catalytic Reduction Retrofit Aftertreatment Event Codes
C12.9 Marine Engines Crankshaft Rear Seal - Remove and Install
3512E Engines Turbocharger Inlet Temperature Sensor - Remove and Install
New Cylinder Head Gasket on Certain C3.4 Engines {1100, 1103, 1104, 1105, 1108, 1109, 1115, 1117, 1121, 1124, 1125} New Cylinder Head Gasket on Certain C3.4 Engines {1100, 1103, 1104, 1105, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
C4.4 Generator Sets Turbocharger - Inspect
C4.4 Generator Sets Air Inlet and Exhaust System
Selective Catalytic Reduction Retrofit Aftertreatment Diagnostic Trouble Codes
Selective Catalytic Reduction Retrofit Aftertreatment System Overview
Selective Catalytic Reduction Retrofit Aftertreatment Sensor Signal (Analog, Active) - Test
Selective Catalytic Reduction Retrofit Aftertreatment DEF Pump Motor - Test
Selective Catalytic Reduction Retrofit Aftertreatment Data Link - Test
Selective Catalytic Reduction Retrofit Aftertreatment SCR Catalyst Inlet Pressure Is Low
Diesel Exhaust Fluid (DEF) Injector Are Failing on Certain C9.3-C18 Machine and Commercial Engines {108I} Diesel Exhaust Fluid (DEF) Injector Are Failing on Certain C9.3-C18 Machine and Commercial Engines {108I}
3512E Engines Turbocharger Outlet Pressure Sensor - Remove and Install
New Turbochargers Are Now Used on Certain 3516 and C175-16 Locomotive and Marine Engines {1052} New Turbochargers Are Now Used on Certain 3516 and C175-16 Locomotive and Marine Engines {1052}
320 GC, 320 and 323 Excavator Battery or Battery Cable - Inspect/Replace
3500E Marine Engines Engine Air Cleaner Element (Single Element) - Inspect/Replace
3512E Engines Pressure Sensor (Engine Coolant) - Remove and Install
G3512 Generator Set Engines Ignition Secondary - Test
3512E Engines Speed Sensor (Turbocharger) - Remove and Install
3512E Tier 4 Final Engines for Land Electric Drilling Coolant Pressure Is Incorrect
New Severe Service DEF Manifold Filter Option Available for Tier 4 Final C9.3-C18 Engines {108K, 3206} New Severe Service DEF Manifold Filter Option Available for Tier 4 Final C9.3-C18 Engines {108K, 3206}
New Severe Service DEF Manifold Filter Option Available for Tier 4 Final C9.3-C18 Machine Engines {108K, 3206} New Severe Service DEF Manifold Filter Option Available for Tier 4 Final C9.3-C18 Machine Engines {108K, 3206}
C7.1 Marine Propulsion Engine Fuel Transfer Pump