Turbocharger Inlet Temperature Sensor - Remove and Install
- Remove straps (1). Disconnect harness assembly (3) .
- Remove turbocharger inlet temperature sensor (2).
Show/hide table
| |
| Illustration 1 | g06067160 |
- Install turbocharger inlet temperature sensor (2) in the reverse order of removal.
- Tighten turbocharger inlet temperature sensor (4) to a torque of
20 ± 3 N·m (177 ± 27 lb in) .
- Tighten turbocharger inlet temperature sensor (4) to a torque of
Caterpillar Information System:
New Cylinder Head Gasket on Certain C3.4 Engines {1100, 1103, 1104, 1105, 1108, 1109, 1115, 1117, 1121, 1124, 1125} New Cylinder Head Gasket on Certain C3.4 Engines {1100, 1103, 1104, 1105, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
C4.4 Generator Sets Turbocharger - Inspect
C4.4 Generator Sets Air Inlet and Exhaust System
Selective Catalytic Reduction Retrofit Aftertreatment Diagnostic Trouble Codes
Selective Catalytic Reduction Retrofit Aftertreatment System Overview
Selective Catalytic Reduction Retrofit Aftertreatment Sensor Signal (Analog, Active) - Test
Selective Catalytic Reduction Retrofit Aftertreatment DEF Pump Motor - Test
Selective Catalytic Reduction Retrofit Aftertreatment Data Link - Test
Selective Catalytic Reduction Retrofit Aftertreatment SCR Catalyst Inlet Pressure Is Low
Selective Catalytic Reduction Retrofit Aftertreatment SCR Catalyst Inlet Pressure Is High
Selective Catalytic Reduction Retrofit Aftertreatment NOx Conversion Is Low
Selective Catalytic Reduction Retrofit Aftertreatment DEF Tank Temperature Is Low
C12.9 Marine Engines Crankshaft Rear Seal - Remove and Install
Selective Catalytic Reduction Retrofit Aftertreatment Event Codes
TR35 Locomotive Transmission Relief Valve (Torque Converter Outlet) - Remove and Install
Diesel Exhaust Fluid (DEF) Injector Are Failing on Certain C9.3-C18 Machine and Commercial Engines {108I} Diesel Exhaust Fluid (DEF) Injector Are Failing on Certain C9.3-C18 Machine and Commercial Engines {108I}
3512E Engines Turbocharger Outlet Pressure Sensor - Remove and Install
New Turbochargers Are Now Used on Certain 3516 and C175-16 Locomotive and Marine Engines {1052} New Turbochargers Are Now Used on Certain 3516 and C175-16 Locomotive and Marine Engines {1052}
320 GC, 320 and 323 Excavator Battery or Battery Cable - Inspect/Replace
3500E Marine Engines Engine Air Cleaner Element (Single Element) - Inspect/Replace
3512E Engines Pressure Sensor (Engine Coolant) - Remove and Install
G3512 Generator Set Engines Ignition Secondary - Test
3512E Engines Speed Sensor (Turbocharger) - Remove and Install
3512E Tier 4 Final Engines for Land Electric Drilling Coolant Pressure Is Incorrect