If there is damage or malfunction in the electrical system:
- Put the power pack out of operation immediately and secure the power pack against restart.
- Remove the connecting cable.
- Have the malfunction repaired.
Ensure that work on the electrical system is only performed by trained electricians.
Have the electrical system checked regularly and malfunctions repair immediately (loose connections, scorched cables, for example).
Roll out the connecting cable completely before operation.
Operate the power pack only with an intact and tested connecting cable.
Only use a connecting cable with grounding conductors and correct grounding conductor connectors for the connector and outlet.
Only used approved connecting cables that are suitable for use on construction sites. Caterpillarrecommends H07RN-F or an equivalent or higher country-specific version.
Immediately replace connecting cables that are damaged or that have loose connectors and/or outlets. Do not travel over the connecting cable.
Check the connecting cable for damage and signs of aging before rolling up the cable for storage.
Do the exceed the rated power of the connecting cable.
Do not put the connecting cable over edges.