Keep the power pack clean. This reduces injury, accident, and fire hazards.
Safely store objects you carry with you in the places provided for this (for example in the storage compartment).
Observe all safety, warning, and information labels.
Ensure that all safety devices are properly installed and functional before starting work.
Before putting the power pack into operation, ensure that nobody is in the danger zone.
Do not operate the power pack near flammable fluids.
Immediately replace damaged connecting cables.
Do not use the connecting cable to carry or hang up the power pack, or to pull the connector out of the outlet.
Keep the connecting cable away from heat, oil, sharp edges, or moving parts of devices.
The operator is responsible for other persons.
Before starting work, familiarize yourself with the job site. This applies to, for example:
- Obstacles in the job site and machine travel area
- Any barriers separating the job site from public roads
- Soil weight-bearing capacity
- Existing overhead and underground lines
- Special operating conditions (for example dust, steam, smoke, asbestos)
The maximum dimensions of the power pack must be known to the operator. Refer to Specifications for more information.
Maintain a safe distance (for example from buildings, edges of building pits).
During work in buildings or in enclosed areas, look out for:
- Height of the ceiling/clearances
- Width of entries/passages
- Maximum load of ceilings and floors
Due to hot machine parts, maintain a safe distance from easily flammable material (for example from hay, dry leaves).
| |
| Illustration 1 | g06021719 |
| Position | Function |
| (A) | Power Pack HPU 300 |
| (B) | Mini Hydraulic Excavator 300.9D VPS |
| (C) | Minimum operating radius with connected power pack |
| (D) | Maximum operating radius with connected power pack |
| Minimum bending radius of power pack hydraulic hoses: |