C18 Generator Set Engines Caterpillar


Ignition Coil - Remove and Install

Usage:

C18 GEN SE RT8

Removal Procedure



    Illustration 1g06022376

  1. Disconnect harness assembly (1) and harness assembly (4).

  2. Remove bolts (2) and ignition coil (3).

Installation Procedure

  1. Install ignition coil (3) in the reverse order of removal.

Caterpillar Information System:

C1.7 and C2.2 Industrial Engine Component Location
New Software Is Now Available for all Cat® Object Detection and Vision Applications On Certain Cat® Products {7610, 7620} New Software Is Now Available for all Cat® Object Detection and Vision Applications On Certain Cat® Products {7610, 7620}
HPU300 Hydraulic Power Pack Motor Stopping
HPU300 Hydraulic Power Pack Tire Information
HPU300 Hydraulic Power Pack Electrical System
C175-20 Locomotive Engine Manifold DEF Temperature Is Low
DG30, DG50, DG60, DG80, DG100, DG125 and DG150 Generator Sets Product Description
C175-16 Locomotive Engines Fuel Filter Differential Pressure - Check
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Generator Bearing - Replace
A New Air-To-Air Aftercooler Hose Is Used on Certain C27 and C32 Engines {1071} A New Air-To-Air Aftercooler Hose Is Used on Certain C27 and C32 Engines {1071}
Energy Storage System Module LIN Communication Wiring (Expanded Enclosure)
DG30, DG50, DG60, DG80, DG100, DG125, and DG150 Generator Set Engines Fuel Injection Lines
DG30, DG50, DG60, DG80, DG100, DG125 and DG150 Generator Sets Product Storage
HPU300 Hydraulic Power Pack Operation
A New Thermostat Housing Bracket Is Used on Certain 3500 Marine Engines {1380, 1393} A New Thermostat Housing Bracket Is Used on Certain 3500 Marine Engines {1380, 1393}
G3512 Generator Set Safety Messages
G3512 EPA Emergency and Non-Emergency Standby Generator Sets General Hazard Information
DG30, DG50, DG60, DG80, DG100, DG125 and DG150 Generator Sets Refill Capacities
HPU300 Hydraulic Power Pack Before Operation
New Software Is Used on Certain 3500 Tier 3 Marine Engines {1920} New Software Is Used on Certain 3500 Tier 3 Marine Engines {1920}
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Engine Operation
A New Damper Is Used on Certain 3512C International Maritime Organization (IMO) II Engines {1205} A New Damper Is Used on Certain 3512C International Maritime Organization (IMO) II Engines {1205}
C175-20 Locomotive Engine Fuel Rail Pressure - Release
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Overhaul (Top End)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.