A New Air-To-Air Aftercooler Hose Is Used on Certain C27 and C32 Engines {1071}
- Industrial Engine
- C27 (S/N: AT41-UP)
- C27 INDUSTRIAL (S/N: RAM1-UP)
- C32 (S/N: BT41-UP)
- C27 INDUSTRIAL (S/N: RAM1-UP)
Description Of Change: The new hose is more resistant to high temperatures and pressures.
Adaptable To: The new 325-9615 Elbow (Hose) replaces the former 137-4266 Elbow (Hose).
The new hose is adaptable to the above engines back to first production.
Note: Ensure that the new hose is double clamped on each end.
This change is effective for the serial numbers listed in Table 1.
Show/hide table
| Effective Serial Numbers |
|---|
| S/N:AT400204-UP |
| S/N:RAM00253-UP |
| S/N:BT400002-UP |
Caterpillar Information System:
Energy Storage System Module LIN Communication Wiring (Expanded Enclosure)
DG30, DG50, DG60, DG80, DG100, DG125, and DG150 Generator Set Engines Fuel Injection Lines
Information on A/D/G Coatings for Bolts, Spacers, and Washers {7000, 7553, 7553} Information on A/D/G Coatings for Bolts, Spacers, and Washers {7000, 7553, 7553}
C18 Generator Set Engines Nozzle Heater Harness - Remove and Install
C18 Marine Generator Set Radiator - Clean
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Maintenance Interval Schedule - Standby
C12.9 Marine Propulsion Engine Cooling System
C8.7 Marine Engine Starting the Engine
New Fuel Hose Assemblies Are Now Used on Certain 3500 Engines {1252} New Fuel Hose Assemblies Are Now Used on Certain 3500 Engines {1252}
C12.9 Marine Propulsion Engine Closed Crankcase Ventilation (CCV) System
New Cylinder Head Groups Are Used For Certain 3500 Engines {1100} New Cylinder Head Groups Are Used For Certain 3500 Engines {1100}
C12.9 Marine Engines Self-Diagnostics
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Generator Bearing - Replace
C175-16 Locomotive Engines Fuel Filter Differential Pressure - Check
DG30, DG50, DG60, DG80, DG100, DG125 and DG150 Generator Sets Product Description
C175-20 Locomotive Engine Manifold DEF Temperature Is Low
HPU300 Hydraulic Power Pack Electrical System
HPU300 Hydraulic Power Pack Tire Information
HPU300 Hydraulic Power Pack Motor Stopping
New Software Is Now Available for all Cat® Object Detection and Vision Applications On Certain Cat® Products {7610, 7620} New Software Is Now Available for all Cat® Object Detection and Vision Applications On Certain Cat® Products {7610, 7620}
C1.7 and C2.2 Industrial Engine Component Location
C18 Generator Set Engines Ignition Coil - Remove and Install
DG30, DG50, DG60, DG80, DG100, DG125 and DG150 Generator Sets Product Storage
HPU300 Hydraulic Power Pack Operation