Information on A/D/G Coatings for Bolts, Spacers, and Washers {7000, 7553, 7553}
- Excavator
- All
The purpose of this publication is to inform how to identify the fastener specification in the field. Caterpillar designed bolts, spacers, and washers must be used in the appropriate locations and tightened properly. For bolts, anti-seize compound may be required to achieve proper torque. Improper torque may result in bolt loosening. The information in Table 1 shows the specifications for three of the most common types of coated bolts, spacers, and washers.
Ensure that the correct bolts, spacers, and washers are used for the correct application. Refer to SIS for the correct fasteners for each application.
Show/hide table
Coated Fasteners | Coating Description | Min Thickness (µm) | ASTM B117 OR ISO 9227 Salt Spray Resistance | In Service Temperature Range (°C) Reference | Coated Color |
---|---|---|---|---|---|
A Coated | Zinc Phosphate + Oil | N/A | 72 h to Red | -50 to 330 | Dark Gray |
D Coated | Electroplated Zinc + (Trivalent Cr or Cr Free + Top Sealer | 5 | 96 h to White | -50 to 170 | Silver (clear or blue-bright iridescent finished) |
G Coated | Zinc Flake Coating | 5 | 720 h to Red | -50 to 220 | Matte Light Gray or Black (the topcoat may contain dyes to modify color) |
Show/hide table
Illustration 1 | g06054758 |
(A) A coated bolts
(D) D coated bolts (G) G coated bolts |
Caterpillar Information System:
C18 Generator Set Engines Nozzle Heater Harness - Remove and Install
C18 Marine Generator Set Radiator - Clean
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Maintenance Interval Schedule - Standby
C12.9 Marine Propulsion Engine Cooling System
C8.7 Marine Engine Starting the Engine
New Fuel Hose Assemblies Are Now Used on Certain 3500 Engines {1252} New Fuel Hose Assemblies Are Now Used on Certain 3500 Engines {1252}
C12.9 Marine Propulsion Engine Closed Crankcase Ventilation (CCV) System
New Cylinder Head Groups Are Used For Certain 3500 Engines {1100} New Cylinder Head Groups Are Used For Certain 3500 Engines {1100}
C12.9 Marine Engines Self-Diagnostics
C4.4 Engines DEF Pressure Does Not Respond
C175-16 Locomotive Engine Fuel Flow Is High
C175-16 Locomotive Engine Sensor Signal (Analog, Active) - Test
DG30, DG50, DG60, DG80, DG100, DG125, and DG150 Generator Set Engines Fuel Injection Lines
Energy Storage System Module LIN Communication Wiring (Expanded Enclosure)
A New Air-To-Air Aftercooler Hose Is Used on Certain C27 and C32 Engines {1071} A New Air-To-Air Aftercooler Hose Is Used on Certain C27 and C32 Engines {1071}
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Generator Bearing - Replace
C175-16 Locomotive Engines Fuel Filter Differential Pressure - Check
DG30, DG50, DG60, DG80, DG100, DG125 and DG150 Generator Sets Product Description
C175-20 Locomotive Engine Manifold DEF Temperature Is Low
HPU300 Hydraulic Power Pack Electrical System
HPU300 Hydraulic Power Pack Tire Information
HPU300 Hydraulic Power Pack Motor Stopping
New Software Is Now Available for all Cat® Object Detection and Vision Applications On Certain Cat® Products {7610, 7620} New Software Is Now Available for all Cat® Object Detection and Vision Applications On Certain Cat® Products {7610, 7620}
C1.7 and C2.2 Industrial Engine Component Location