Engine Oil Pan
Show/hide table
Illustration 1 | g06000240 |
Show/hide table
Specification for 434-4255 Oil Pan Gp | |||
Item | Qty | Part | Specification Description |
1 | 2 | 3P-0654 O-Ring Seal | Before assembly, apply 1P-0808 Multipurpose Grease to the bores. |
2 | 16 | 0L-1143 Bolt | Use the following procedure to tighten the sequence for hand torque wrench or single spindle torque tool: 1. Tighten the end bolts followed by the left and right side bolts. 2. Start with a bold towards the center of the right and left side of the pan and work towards the ends. 3. Again tighten the three center bolts of the left and right side. 4. Again tighten all the end bolts. |
3 | 2 | 7X-1547 O-Ring Seal | Before assembly, apply 1P-0808 Multipurpose Grease to the bores. |
4 | 2 | 0S-1590 Bolt | In order to prevent stress on the tube assembly (6), use the following tightening procedure during assembly.
1. Tighten two blots (5) to 2. Then tighten two bolts (4) to |
5 | 2 | 0S-1588 Bolt | In order to prevent stress on the tube assembly (6), use the following tightening procedure during assembly.
1. Tighten two blots (5) to 2. Then tighten two bolts (4) to |
7 | 2 | 4B-2363 Oil Drain Plug | Torque to |
8 | - | - | As required, applyLoctiteRTV Silicone Clear to the joints of the gasket. |
Caterpillar Information System:
G3500H 60Hz Generator Sets Product Storage
G3500H 60Hz Generator Sets Reference Information
An Improved Belt Guard Now Available for Certain C13 Generator Sets {7174} An Improved Belt Guard Now Available for Certain C13 Generator Sets {7174}
A New Fuel Pump and Engine Software Are Now Used on Certain C15 and C18 Generator Set Engines and C16 Industrial Engines {1256, 1920} A New Fuel Pump and Engine Software Are Now Used on Certain C15 and C18 Generator Set Engines and C16 Industrial Engines {1256, 1920}
A New Alternator Is Now Used For Certain 3500 Engines {1405} A New Alternator Is Now Used For Certain 3500 Engines {1405}
Inspection of the 460-7333 Fan Spider As For Cracking {1356} Inspection of the 460-7333 Fan Spider As For Cracking {1356}
A New Auto Reset Circuit Breaker Is Now Used on Certain C9, C15, and C18 Generator Sets {4480} A New Auto Reset Circuit Breaker Is Now Used on Certain C9, C15, and C18 Generator Sets {4480}
Improved Fuel Tanks Are Now Used on Certain C9, C15, and C18 Retail Generator Set Engines {7060} Improved Fuel Tanks Are Now Used on Certain C9, C15, and C18 Retail Generator Set Engines {7060}
Procedure for Purging the Air System for Certain 3512C Engines with Dynamic Gas Blending {1000, 1920} Procedure for Purging the Air System for Certain 3512C Engines with Dynamic Gas Blending {1000, 1920}
G3500H 60Hz Generator Sets Sound Information
G3500H 60Hz Generator Sets General Hazard Information
C18 MAR GENSET Electric Power Generation Radiator - Remove and Install - SCAC Radiator Core
3516E Generator Set Engines Flywheel Housing Cover
3516E Generator Set Engines Accessory Drive
3500E Marine Engines Fuel Injector Mechanism
New Software is Available for Certain C4.4 Engines {1920} New Software is Available for Certain C4.4 Engines {1920}
797 Off-Highway Truck Link and Rear Cylinder (Suspension) - Check
A New Fuel Valve Is Now Used for Certain G3500BPetroleum Engines and G3500H Electric Power Engines {1741, 5137} A New Fuel Valve Is Now Used for Certain G3500BPetroleum Engines and G3500H Electric Power Engines {1741, 5137}
3516B Generator Set with Dynamic Gas Blending Alternator Mounting
G3508J, G3516J, and G3520J Engines Gas Pressure Regulator - Remove
A New Coolant Elbow Assembly is Now Used on Certain C18 Marine Engines {1059} A New Coolant Elbow Assembly is Now Used on Certain C18 Marine Engines {1059}
G3508J, G3516J, and G3520J Engines Gas Pressure Regulator - Install
G3508J, G3516J, and G3520J Engines Gas Pressure Regulator Solenoid - Remove and Install
3516E Generator Set Engines Fuel Injector