Gas Pressure Regulator - Test
Show/hide table
Illustration 1 | g02583418 |
The gas regulator is on the right side of a XG400 Power Module. |
Check the fuel pressure before the gas pressure regulator and after the gas pressure regulator. Table 1 lists the fuel pressure that is required for the gas pressure regulator.
Show/hide table
Requirements for Fuel Pressure To the Gas Pressure Regulator | |
Fuel System | Pressure |
Compressor Inlet Fuel Delivery | |
Pressure of the Fuel Supply To the Carburetor
The gas pressure regulator maintains a pressure differential between the air and the fuel that is supplied to the carburetor. After setting, the gas pressure regulator will maintain the pressure differential in response to changes in the air pressure.
Set the pressure of the fuel supply using the chart found in Special Instructions, REHS6590.
Caterpillar Information System:
Initial Setup for Certified G3512 Generator Set Engines {1021} Initial Setup for Certified G3512 Generator Set Engines {1021}
XQ400 Power Module Engine Speed/Timing Sensor - Clean/Inspect
Cylinder Head Replacement Option for Certain C175 Petroleum Engines{1101} Cylinder Head Replacement Option for Certain C175 Petroleum Engines{1101}
Quick Start Wiring Guide for Certain G3300B Gas Compression Engines {1000, 1408, 1451, 1453} Quick Start Wiring Guide for Certain G3300B Gas Compression Engines {1000, 1408, 1451, 1453}
320E and 323E Excavators Lifting Objects
G3508J, G3516J, and G3520J Engines Crankshaft Main Bearings - Install
G3508J, G3516J, and G3520J Engines Crankshaft Main Bearings - Remove
G3612 and G3616 Engines Crankshaft - Install
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Turbocharger - Remove and Install
G3612 and G3616 Engines Crankshaft - Remove
G3508J, G3516J, and G3520J Engines Camshaft Bearings - Install
G3508J, G3516J, and G3520J Engines Camshaft Bearings - Remove
C175–16 Locomotive Engine Valve Lash - Adjust - Hydraulic Lash Adjusters
2015/09/28 A New Oil Pump Is Now Used For Certain C13 Machine Engines {1304}
2015/09/28 A New Oil Pump Is Now Used For Certain C13 Engines {1304}
C12.9 Marine Engines Emissions Certification Film
794 AC Off-Highway Truck Machine Systems Control Valve (Hoist) - Remove and Install
794 AC Off-Highway Truck Machine Systems Gear Pump (Hoist) - Remove and Install
794 AC Off-Highway Truck Machine Systems Gear Pump (Pump Drive Lubrication) - Remove and Install
794 AC Off-Highway Truck Machine Systems Piston Pump (Steering) - Remove and Install
794 AC Off-Highway Truck Machine Systems Pump and Motor - Remove and Install - Final Drive Lubrication
G3508J, G3516J, and G3520J Engines Crankshaft - Remove
794 AC Off-Highway Truck Machine Systems Piston Pump (Hydraulic Fan) - Remove and Install
G3508J, G3516J, and G3520J Engines Crankshaft - Install