Cylinder Head Replacement Option for Certain C175 Petroleum Engines{1101} Caterpillar


Cylinder Head Replacement Option for Certain C175 Petroleum Engines{1101}

Usage:

C175-16 P6L
Engine:
C175-16 (S/N: P6L1-UP)

Introduction

The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.

Problem

The 10R-9020 Cylinder Head Gp (Reman) has had reports of cracked valve seats. If cracked valve seats occur, the engine coolant will leak into the combustion chamber causing secondary damage.

Solution

Replace the 10R-9020 Cylinder Head Gp (Reman) with the 439-5473 Cylinder Head Gp (New) or the 20R-0703 Cylinder Head Gp (Reman) .

Caterpillar Information System:

Quick Start Wiring Guide for Certain G3300B Gas Compression Engines {1000, 1408, 1451, 1453} Quick Start Wiring Guide for Certain G3300B Gas Compression Engines {1000, 1408, 1451, 1453}
320E and 323E Excavators Lifting Objects
G3508J, G3516J, and G3520J Engines Crankshaft Main Bearings - Install
G3508J, G3516J, and G3520J Engines Crankshaft Main Bearings - Remove
G3612 and G3616 Engines Crankshaft - Install
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Turbocharger - Remove and Install
G3612 and G3616 Engines Crankshaft - Remove
G3508J, G3516J, and G3520J Engines Camshaft Bearings - Install
G3508J, G3516J, and G3520J Engines Camshaft Bearings - Remove
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Cylinder Head - Install
G3508J, G3516J, and G3520J Engines Camshaft - Install
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Cylinder Head - Remove
XQ400 Power Module Engine Speed/Timing Sensor - Clean/Inspect
Initial Setup for Certified G3512 Generator Set Engines {1021} Initial Setup for Certified G3512 Generator Set Engines {1021}
XQ400 Power Module Gas Pressure Regulator - Test
C175–16 Locomotive Engine Valve Lash - Adjust - Hydraulic Lash Adjusters
2015/09/28 A New Oil Pump Is Now Used For Certain C13 Machine Engines {1304}
2015/09/28 A New Oil Pump Is Now Used For Certain C13 Engines {1304}
C12.9 Marine Engines Emissions Certification Film
794 AC Off-Highway Truck Machine Systems Control Valve (Hoist) - Remove and Install
794 AC Off-Highway Truck Machine Systems Gear Pump (Hoist) - Remove and Install
794 AC Off-Highway Truck Machine Systems Gear Pump (Pump Drive Lubrication) - Remove and Install
794 AC Off-Highway Truck Machine Systems Piston Pump (Steering) - Remove and Install
794 AC Off-Highway Truck Machine Systems Pump and Motor - Remove and Install - Final Drive Lubrication
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.