Cylinder Liner - Remove
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 5P-8665 | Cylinder Liner Puller | 1 |
| B | 6V-4133 | Wedge Bracket | 1 |
Start By:
- Remove the pistons and the connecting rod assemblies.
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Drain the coolant from the cooling system into a suitable container for storage or disposal.
- Place a cover on the crankshaft journals in order to shield the journals from dirt and coolant.
- Install Tooling (A) and (B) in order to remove the cylinder liner.
Show/hide table
Illustration 2 g00578731 Typical example - Remove seals (1) and filler band (2) from the cylinder liner.
Show/hide table
| |
| Illustration 1 | g00578729 |
|
Typical example | |
Caterpillar Information System:
G3612 and G3616 Engines Crankshaft Main Bearings - Remove
G3612 and G3616 Engines Camshaft - Remove
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Cylinder Liner Projection
794 AC Off-Highway Truck Machine Systems Solenoid and Manifold Valve (Steering) - Assemble
794 AC Off-Highway Truck Machine Systems Solenoid and Manifold Valve (Steering) - Disassemble
794 AC Off-Highway Truck Machine Systems Makeup Valve (Blower Motor) - Remove and Install
352F Excavator Declaration of Conformity
XQ2000 Power Module Product Installation
C18 Generator Sets Maintenance Interval Schedule - Emergency Standby Power
C18 Generator Sets Maintenance Interval Schedule - Standby
C18 Generator Sets Maintenance Interval Schedule - Prime Power
CN1566, CN2086, CN2586, CN3086, CN3586, CN4086 and CN5086 Electric Motors Mechanical Performance Problem
G3612 and G3616 Engines Crankshaft Main Bearings - Install
G3508J, G3516J, and G3520J Engines Cylinder Liner - Install
G3508J, G3516J, and G3520J Engines Camshaft - Remove
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Cylinder Head - Remove
G3508J, G3516J, and G3520J Engines Camshaft - Install
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Cylinder Head - Install
G3508J, G3516J, and G3520J Engines Camshaft Bearings - Remove
G3508J, G3516J, and G3520J Engines Camshaft Bearings - Install
G3612 and G3616 Engines Crankshaft - Remove
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Turbocharger - Remove and Install
G3612 and G3616 Engines Crankshaft - Install
G3508J, G3516J, and G3520J Engines Crankshaft Main Bearings - Remove