The Required Parts for Installing Turbochargers on Certain 2007 On-Highway Truck Engines Is Published {1052}
- Engine:
- C13 (S/N: LEE1-UP)
- C15 (S/N: SDP1-UP; B5R1-UP)
C13 and C15 2007 ACERT On-Highway Truck high-pressure turbochargers leak oil to the compressor stage in applications with extensive idling times. The oil accumulates over time at the pre-cooler and seeps out of the air piping joint.
ReferenceTruck Engine News, SEBD6877 and Truck Engine News, SEBD6882 for the turbocharger oil drain line changes.
ReferenceSpecial Instruction, REHS9281 to assure the turbocharger oil drain lines are updated.
Caterpillar Information System:
2015/09/18 A Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As is Available {1156}
2015/09/17 A Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As is Available {1156}
2015/09/18 A Guide to Reman Product Markings is Now Available {7754}
2015/09/17 A Guide to Reman Product Markings is Now Available {7754}
2015/09/15 A Guide to Reman Product Markings is Now Available {7754}
2015/09/17 Cat® Reman Announces Additions to Sea Water Pump Portfolios {1371}
C1.7 and C2.2 Industrial Engine Oil Contains Fuel
SRMP Electric Power Generation SRMP Generator Rotor - Remove and Install
3516B Generator Set Engines with Dynamic Gas Blending Injector Solenoid - Test
C1.7 and C2.2 Industrial Engine Engine Top Speed Is Not Obtained
EMCP4.2B Custom Event Is Not Present
EMCP4.2B Diagnostic Capabilities
390F Excavator Stopping the Engine
C13 Generator Set Maintenance Interval Schedule - Prime Power
C13 Generator Set Maintenance Interval Schedule - Standby
SRMP Electric Power Generation SRMP Generator Exciter - Remove and Install
C13 Generator Set Maintenance Interval Schedule - Emergency Standby Power
EMCP 4.4 Supervisory Control Panel Maintenance Interval Schedule
2015/09/17 New Software Is Used for Certain 3500 Dynamic Gas Blending Well Service Engines {1250, 1280, 1920}
New Software Is Used for Certain 3500 Dynamic Gas Blending Land Electric Engines {1920} New Software Is Used for Certain 3500 Dynamic Gas Blending Land Electric Engines {1920}
New Stats and Tube Routings are Now Used for Certain 3512 and 3516 Marine Engines {1355, 1380, 1393} New Stats and Tube Routings are Now Used for Certain 3512 and 3516 Marine Engines {1355, 1380, 1393}
794 AC Off-Highway Truck Machine Systems Control Valve (Hoist) - Disassemble
794 AC Off-Highway Truck Machine Systems Control Valve (Hoist) - Assemble
Inspect Inlet Check Valve and Clean Expansion Chamber Before Installing Replacement Air Compressor to Avoid Repeat Compressor Failure{1803, 5502} Inspect Inlet Check Valve and Clean Expansion Chamber Before Installing Replacement Air Compressor to Avoid Repeat Compressor Failure{1803, 5502}