Crankcase Breather - Remove and Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove clamps (2) and tee hose (3).
- Remove clamp (8), clamp (9), crankcase breather (1), and crankcase breather (4).
- Remove clamp (6) and elbow hose (5).
- Remove clamp (10) and crankcase breather (7).
Show/hide table
Illustration 1 | g03849693 |
- Install crankcase breather (7), crankcase breather (4), and crankcase breather (1) in the reverse order of removal.
- Lubricate the bore of crankcase breather (7), crankcase breather (4), and crankcase breather (1) with the lubricant that is being sealed.
- Tighten clamp (10), clamp (9), and clamp (8) to a torque of
7 ± 1 N·m (60 ± 9 lb in) . - Tighten clamp (6) and clamps (2) to a torque of
3 ± 1 N·m (27 ± 9 lb in) .
Caterpillar Information System:
3512C Generator Set Engine Engine Oil Pan - Assemble
794 AC Off-Highway Truck Field Assembly Steering Lines - Install
Customer Interface for Certain G3600 A4 Engines {1901, 4490, 7451} Customer Interface for Certain G3600 A4 Engines {1901, 4490, 7451}
C4.4 and C7.1 Engines Speed Control - Test - Analog
3512C Generator Set Engine Engine Oil Pan - Disassemble
2015/06/26 Cat® Reman Announces Additions to the Fuel Air Ratio Controls Portfolio for Certain Truck Engine Applications {1278}
2015/06/26 Cat® Reman Announces Additions to the Fuel Air Ratio Controls Portfolio for Certain Engine Applications {1278}
2015/06/25 Cat® Reman Announces Additions to the Fuel Air Ratio Controls Portfolio for Certain Machine Applications {1278}
C280-08 Tier 4 Engine Engine Oil Filter Housings - Remove and Install
2015/07/24 Cat® Reman Announces the Availability of Additional Engine Components for Certain Truck Engine Applications {1052, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/25 Cat® Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/07/24 Cat® Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
Incorrect Announcement of Battery Overcharged On Certain C4.4 and C6.6 Generator Set{4490, 751B} Incorrect Announcement of Battery Overcharged On Certain C4.4 and C6.6 Generator Set{4490, 751B}
3512C Generator Set Engine Valve Mechanism Cover Base - Remove and Install
330F MHPU Mobile Hydraulic Power Unit Track Adjustment - Adjust - If Equipped
Bench Test Procedure for Hydraulic Piston Pumps {5070} Bench Test Procedure for Hydraulic Piston Pumps {5070}
2015/07/07 Timer Rework for Overhead Lights in XQ2000 {1429}
2015/07/07 A New Liner Seal Is Used on Certain G3300 Engines {1201}
2015/06/26 New Software Is Now used on Certain C11 Engines {7620}
False Intake Manifold Air Temperature Causing Shutdown on Certain G3412 Engines with EMCP 4.2 Panels{1920, 4490, 7490} False Intake Manifold Air Temperature Causing Shutdown on Certain G3412 Engines with EMCP 4.2 Panels{1920, 4490, 7490}
C8.7 Marine Engine Inlet and Exhaust Valves - Remove and Install
C27 and C32 Industrial Engines Maintenance Interval Schedule
A New Gas Shutoff Valve Is Available For Certain G3306 and G3306B Engines {1259, 1704} A New Gas Shutoff Valve Is Available For Certain G3306 and G3306B Engines {1259, 1704}
3512C Generator Set Engine Accessory Drive (Front) - Remove and Install