Priority Valve - Disassemble
开始:
- 拆下优先阀。
- 拆下螺栓 (1)、盖 (2) 和 O 形密封圈。
Show/hide table
图 2 g03809954 - 拆下弹簧 (4) 和活塞 (3)。
Show/hide table
图 3 g03809963 - 拆下螺塞 (5)。
- 拆下内部活塞 (8)、控制阀弹簧 (7) 和控制阀活塞 (6)。
Show/hide table
| |
| 图 1 | g03809839 |
Show/hide table
 |
|
弹簧加压的零件和/或盖板可能导致人身伤害。 拆卸盖板时弹簧力将被释放。 松动螺栓时做好准备把持住弹簧加载的盖板。 |
Caterpillar Information System:
C2.2 Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove - Connecting Rods in Position
C2.2 Engines for Caterpillar Built Machines Lifter Group - Remove and Install
C2.2 Engines for Caterpillar Built Machines Crankshaft - Install
Coolant Diverters for the NRS Cooler Are Being Left Out after Servicing C9.3 Tier 4 Interim and Final Engines{108C, 135D} Coolant Diverters for the NRS Cooler Are Being Left Out after Servicing C9.3 Tier 4 Interim and Final Engines{108C, 135D}
C2.2 Engines for Caterpillar Built Machines Crankshaft - Remove
G3612 and G3616 Engines Priority Valve - Remove and Install
C9.3 Marine Auxiliary and Generator Set Engine Exhaust System Contains Oil
C9.3 Marine Auxiliary and Generator Set Engine Exhaust System Contains Coolant
G3612 and G3616 Engines Oil Temperature Regulators - Remove and Install
2015/04/10 Updated Torque Requirements for Reman Rocker Arm Adjusting Screw Lock Nuts on Certain C15, C16, and C18 Truck Engines {1123}
2015/04/03 Updated Torque Requirements for Reman Rocker Arm Adjusting Screw Lock Nuts on Certain C15, C16, C18, C27, and C32 Engines {1123}
2015/03/31 Updated Torque Requirements for Reman Rocker Arm Adjusting Screw Lock Nuts on Certain C15, C18, C27, and C32 Machine Engines {1123}
C2.2 Engines for Caterpillar Built Machines Connecting Rod Bearings - Install - Connecting Rods in Position
C2.2 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
C2.2 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
C2.2 Engines for Caterpillar Built Machines Crankshaft Gear - Remove and Install
C2.2 Engines for Caterpillar Built Machines Glow Plugs - Remove and Install
C9 Generator Set Product Installation
G3612 and G3616 Engines Priority Valve - Assemble
C2.2 Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
C2.2 Engines for Caterpillar Built Machines Boost Pressure Sensor - Remove and Install
C2.2 Engines for Caterpillar Built Machines Camshaft - Disassemble
G3612 and G3616 Engines Vibration Damper - Remove and Install
C2.2 Engines for Caterpillar Built Machines Camshaft - Assemble