CG137-08 and CG137-12 Engines Caterpillar


Declaration of Conformity

Usage:

CG137-08 FPL

Table 1
An EC Declaration of Conformity document was provided with the product if the product was manufactured to comply with specific requirements for the European Union. In order to determine the details of the applicable Directives, review the complete EC Declaration of Conformity provided with the product. The extract shown below from an EC Declaration of Conformity for products that are declared compliant to "2006/42/EC" applies only to those products originally "CE" marked by the manufacturer listed and which have not since been modified.    
   

EC DECLARATION OF CONFORMITY OF PRODUCTS
   
   

Manufacturer:CATERPILLAR INC. 100 N.E. ADAMS STREET PEORIA, IL 61629 USA
   

Person authorized to compile the Technical File and to communicate relevant parts of the Technical File to the Authorities of European Union Member States on request:
   
    Standards & Regulations Manager,Caterpillar France S.A.S 40,
Avenue Leon-Blum, B.P. 55, 38041 Grenoble Cedex 9, France    
I, the undersigned, _________, hereby certify that the construction equipment specified hereunder    
Description:
   
Generic Denomination:     Power Generation Equipment        


   
Function:     Power Generator            


   
Model/Type:     CG137-12            


   
Serial Number:                


   
Commercial Name:     Caterpillar            
Fulfills all the relevant provisions of the following Directives        

   
                       
    Directives     Notified Body    
Document No.    
   
    2006/42/EC     N/A            
    2006/95/EC     N/A    
   
   
    2004/108/EC     N/A            
    2000/14/EC amended by 2005/88/EC, Note (1)     Note (2)            
                           
Note (1)     Annex -_____ Guaranteed Sound Power Level -_____dB (A)
Representative Equipment Type Sound Power Level - _____dB (A)
Engine Power per ____-____ kW Rated engine speed - _____ rpm
Technical Documentation accessible through person listed above authorized to compile the Technical File
   
   
Note (2)     Notified body name and address        
           
Done at:
   
        Signature            
Date:
   
        Name/Position            
                           
Note: The above information was correct as of July, 2009, but may be subject to change. Refer to the individual declaration of conformity issued with the product for exact details.    

Caterpillar Information System:

G3520H Generator Set Engine Turbocharger - Disassemble
C7 and C9 Industrial Engines Ether Starting Aid - Test
C6.6 Generator Sets Maintenance Interval Schedule
C6.6 Generator Sets Maintenance Interval Schedule
3500C Marine Engines Maintenance Interval Schedule
794 AC Off-Highway Truck Machine Systems Front Wheel, Bearing and Duo-Cone Seal - Install
794 AC Off-Highway Truck Machine Systems Front Wheel, Bearing and Duo-Cone Seal - Remove
G3520H Generator Set Engine Fuel Control Valve - Remove and Install
C4.4 Engines for Caterpillar Built Machines Engine Design
C7 and C9 Industrial Engines Electrical Power Supply - Test
C7 and C9 Industrial Engines Coolant Level - Test
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785} A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
Reuse and Salvage for C4.4, C6.6 & C7.1 Engine Cylinder Blocks {0374, 0599, 0701, 0705, 1200, 1201} Reuse and Salvage for C4.4, C6.6 & C7.1 Engine Cylinder Blocks {0374, 0599, 0701, 0705, 1200, 1201}
C7 and C9 Industrial Engines Indicator Lamp - Test
XQ400 Power Module Parallel Operation
XQ400 Power Module Emergency Stopping
C280 Marine Engines Exhaust Temperature - Test
C7 and C9 Industrial Engines Injection Actuation Pressure - Test
G3520H Generator Set Engine Turbocharger - Assemble
XQ400 Power Module Carburetor Air/Fuel Ratio - Check/Adjust
XQ400 Power Module Ignition System Timing - Check/Adjust
XQ400 Power Module Exhaust Bypass - Inspect
CG137-08 and CG137-12 Engines Catalytic Converter Substrate - Inspect
XQ400 Power Module Control Panel - Inspect/Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.