Control Panel - Inspect/Test
Inspect the condition of the panel. If a component is damaged, ensure that the component is repaired or that the component is replaced. If equipped, ensure that the electronic displays are operating properly. Inspect the wiring for good condition. Ensure that the wiring connections are secure.
Electronic Modular Control Panel 4 (EMCP 4.4)
Show/hide table
| |
| Illustration 1 | g03430615 |
|
(1) Display screen
(2) F4 Soft key (3) F3 Soft key (4) F2 Soft key (5) F1 Soft key (6) Control key (7) AC overview key (8) Engine overview key (9) Main menu (10) Warning Indicator lamp (yellow) (11) Acknowledge alarm key and silence key (12) Shutdown indicator lamp (red) (13) Event reset key (14) Event log key (15) Run key (16) Auto key (17) Stop key (18) Escape key (19) Up key (20) Right key (21) OK key (22) Down key (23) Left key | |
Perform the following steps in order to test the lamp on the EMCP 4 control panel:
- Press the Main Menu button (9).
- Scroll to and select Preferences.
- Press the OK button.
- Scroll to and select Lamp Test.
- Press the OK button
The Panel Lights switch should turn on the panel lights. Toggle the switch in order to ensure that the panel lights are working.
Caterpillar Information System:
CG137-08 and CG137-12 Engines Catalytic Converter Substrate - Inspect
XQ400 Power Module Exhaust Bypass - Inspect
XQ400 Power Module Ignition System Timing - Check/Adjust
XQ400 Power Module Carburetor Air/Fuel Ratio - Check/Adjust
G3520H Generator Set Engine Turbocharger - Assemble
C7 and C9 Industrial Engines Injection Actuation Pressure - Test
C280 Marine Engines Exhaust Temperature - Test
XQ400 Power Module Emergency Stopping
XQ400 Power Module Parallel Operation
C7 and C9 Industrial Engines Indicator Lamp - Test
Reuse and Salvage for C4.4, C6.6 & C7.1 Engine Cylinder Blocks {0374, 0599, 0701, 0705, 1200, 1201} Reuse and Salvage for C4.4, C6.6 & C7.1 Engine Cylinder Blocks {0374, 0599, 0701, 0705, 1200, 1201}
CG137-08 and CG137-12 Engines Declaration of Conformity
XQ400 Power Module Engine Performance - Test
XQ400 Power Module Gas Pressure Regulator - Test
C3.4B Engines Relay - Test - Start Relay
Radiator for C4.4 Marine Generator Set{1353} Radiator for C4.4 Marine Generator Set{1353}
G3512H and G3516H Generator Set Engines Air Inlet Manifold - Remove and Install
DE Series Generator Set With Cat C7.1 Engine Product Description
2014/10/03 Cat® Reman Announces Additional C7 Engine Options for Certain Thomas Built Bus Applications {1000, 1201}
Engine System Setup for Certified CG137-12 Generator Set Engines {1270, 1278} Engine System Setup for Certified CG137-12 Generator Set Engines {1270, 1278}
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Air Shutoff - Test
DE Series Generator Set With Cat C7.1 Engine Safety Messages
DE Series Generator Set With Cat C7.1 Engine Model View Illustrations
DE Series Generator Set With Cat C7.1 Engine Refill Capacities and Recommendations