G3520H Generator Set Engine Caterpillar


Turbocharger - Disassemble

Usage:

G3520H GFP

拆解步骤

开始:

  1. 拆下涡轮增压器。


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损並縮短部件使用寿命。




    图 1g03730483

  1. 拆下螺栓 (2) 和护罩 (1)。


    图 2g03730333

  2. 标记三个涡轮增压器壳体以便在组装时对齐标记。

  3. 拆下螺栓 (6)。

  4. 拆下压缩机壳体 (3)、压缩机嵌件 (4) 和扩散器 (5)。 压缩机壳体 (3) 的重量约为 65 kg (144 lb)

  5. 拆下螺栓 (8)。

    注: 涡轮机叶片具有锋利的边缘。 小心处理。

  6. 拆下涡轮机壳体 (10) 和喷嘴环 (9)。 涡轮机壳体 (10) 的重量约为 125 kg (276 lb)。 阀芯组件 (7) 的重量约为 185 kg (408 lb)

Caterpillar Information System:

C7 and C9 Industrial Engines Ether Starting Aid - Test
C6.6 Generator Sets Maintenance Interval Schedule
C6.6 Generator Sets Maintenance Interval Schedule
3500C Marine Engines Maintenance Interval Schedule
794 AC Off-Highway Truck Machine Systems Front Wheel, Bearing and Duo-Cone Seal - Install
794 AC Off-Highway Truck Machine Systems Front Wheel, Bearing and Duo-Cone Seal - Remove
G3520H Generator Set Engine Fuel Control Valve - Remove and Install
C4.4 Engines for Caterpillar Built Machines Engine Design
C7 and C9 Industrial Engines Electrical Power Supply - Test
C7 and C9 Industrial Engines Coolant Level - Test
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785} A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
794 AC Off-Highway Truck Engine Supplement Belt Tightener - Remove and Install
CG137-08 and CG137-12 Engines Declaration of Conformity
Reuse and Salvage for C4.4, C6.6 & C7.1 Engine Cylinder Blocks {0374, 0599, 0701, 0705, 1200, 1201} Reuse and Salvage for C4.4, C6.6 & C7.1 Engine Cylinder Blocks {0374, 0599, 0701, 0705, 1200, 1201}
C7 and C9 Industrial Engines Indicator Lamp - Test
XQ400 Power Module Parallel Operation
XQ400 Power Module Emergency Stopping
C280 Marine Engines Exhaust Temperature - Test
C7 and C9 Industrial Engines Injection Actuation Pressure - Test
G3520H Generator Set Engine Turbocharger - Assemble
XQ400 Power Module Carburetor Air/Fuel Ratio - Check/Adjust
XQ400 Power Module Ignition System Timing - Check/Adjust
XQ400 Power Module Exhaust Bypass - Inspect
CG137-08 and CG137-12 Engines Catalytic Converter Substrate - Inspect
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.