C3.4B Industrial Engine Caterpillar


Diesel Exhaust Fluid Filter - Clean/Replace

Usage:

3.4B C88


Ilustrace 1g03731253
Typický příklad

  • Přesvědčte se, že je oblast kolem filtru kapaliny do výfuku dieselového motoru (DEF) čistá a zbavená nečistot.

  • K demontáži víka (3) použijte 27mm nástrčný klíč s dvojím šestihranem. Demontujte expanzní zařízení (2).

  • Zasuňte dodaný nástroj do místa (A). Demontujte filtrační vložku kapaliny DEF (4) z hlavního tělesa (1).

    Poznámka Před montáží zkontrolujte orientaci nové filtrační vložky kapaliny DEF.

  • Namontujte novou filtrační vložku kapaliny DEF do hlavního tělesa. Namontujte expanzní zařízení do filtrační vložky. Namontujte víko a utáhněte ho momentem 20 N·m (14 lb ft).
  • Caterpillar Information System:

    C3.4B Industrial Engine Coolant (ELC) - Change
    C3.4B Industrial Engine Coolant (DEAC) - Change
    C3.4B Industrial Engine Welding on Engines with Electronic Controls
    The Third Clutch Friction Disc May Fail on Certain 777 Off-Highway Trucks{3054, 3155, 3160} The Third Clutch Friction Disc May Fail on Certain 777 Off-Highway Trucks{3054, 3155, 3160}
    C3.4B Industrial Engine Reference Information
    C3.4B Industrial Engine Plate Locations and Film Locations
    C3.4B Industrial Engine Model View Illustrations
    C3.4B Industrial Engine Battery Disconnect Switch
    C4.4 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Tank - Flush
    C4.4 Engines for Caterpillar Built Machines Bearing Clearance - Check
    2014/11/19 Improved Product LinkTM and Product Link WebTM Software Is Now Available for All Cat® Products Equipped with PLE640, PLE641, PLE631, PL641, and PL631 Systems {7606, 7620}
    2014/06/24 New Engine Software Is Available for Certain 3512C Locomotive Engines {1901, 1920}
    C4.4 Engines for Caterpillar Built Machines Inlet Manifold Pressure Sensor - Remove and Install
    C4.4 Engines for Caterpillar Built Machines Secondary Engine Speed/Timing Sensor - Remove and Install
    C3.4B Industrial Engine Product Storage
    2015/02/27 New Software Is Now Used for C27 and C32 Tier 4 Final Industrial Engines {1901, 1920}
    C3.4B Industrial Engine Alarms and Shutoffs
    2014/06/27 New Software Is Now Used on Certain CG137 Engines {1901, 1920}
    C3.4B Industrial Engine Gauges and Indicators
    2014/07/07 New Engine Software Is Used on CG137-12 Generator Set Engines {1901, 1920}
    C13, C15, and C18 Tier 4 Interim Engines Exhaust System Contains Coolant
    C13, C15, and C18 Tier 4 Final Engines Exhaust System Contains Coolant
    455-1195 Top End Overhaul Foundational Kit for C18 Marine Engines{1000} 455-1195 Top End Overhaul Foundational Kit for C18 Marine Engines{1000}
    456-4449 Support Device{0374, 0599, 0629, 0632, 0700} 456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.