Plate Locations and Film Locations
Cat dealers need all of these numbers in order to determine the components that were included with the engine. This information permits accurate identification of replacement part numbers.
The numbers for fuel setting information for electronic engines are stored within the flash file. These numbers can be read by using the electronic service tool.
Show/hide table
| |
| Illustration 1 | g03733236 |
|
Typical example of a non-stressed cylinder block | |
The engine serial number can be installed in three different positions.
All engines will have the serial number install in location (1) on the front face of the engine.
On a non-stressed cylinder block the serial number is located in position (2). On the left-hand side on the cylinder block.
Show/hide table
| |
| Illustration 2 | g02826736 |
|
Typical example | |
On a stressed cylinder block the serial number is located in position (3).
The engine serial number is stamped on the emissions plate.
Ensure that all numbers on the aftertreatment are recorded.
Caterpillar Information System:
C3.4B Industrial Engine Model View Illustrations
C3.4B Industrial Engine Battery Disconnect Switch
C4.4 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Tank - Flush
C4.4 Engines for Caterpillar Built Machines Bearing Clearance - Check
2014/11/19 Improved Product LinkTM and Product Link WebTM Software Is Now Available for All Cat® Products Equipped with PLE640, PLE641, PLE631, PL641, and PL631 Systems {7606, 7620}
2014/06/24 New Engine Software Is Available for Certain 3512C Locomotive Engines {1901, 1920}
794 AC Off-Highway Truck Service Brakes - Inspect
794 AC Off-Highway Truck Retarding Contactor - Inspect/Replace
794 AC Off-Highway Truck Retarding Contactor - Replace - Contactor Tip
C175-16 PETROLEUM ENGINES Exhaust Shield - Remove and Install
C175-16 PETROLEUM ENGINES Air Cleaner - Remove and Install
C3.4B Industrial Engine Product Description
C3.4B Industrial Engine Reference Information
The Third Clutch Friction Disc May Fail on Certain 777 Off-Highway Trucks{3054, 3155, 3160} The Third Clutch Friction Disc May Fail on Certain 777 Off-Highway Trucks{3054, 3155, 3160}
C3.4B Industrial Engine Welding on Engines with Electronic Controls
C3.4B Industrial Engine Coolant (DEAC) - Change
C3.4B Industrial Engine Coolant (ELC) - Change
C3.4B Industrial Engine Diesel Exhaust Fluid Filter - Clean/Replace
C4.4 Engines for Caterpillar Built Machines Inlet Manifold Pressure Sensor - Remove and Install
C4.4 Engines for Caterpillar Built Machines Secondary Engine Speed/Timing Sensor - Remove and Install
C3.4B Industrial Engine Product Storage
2015/02/27 New Software Is Now Used for C27 and C32 Tier 4 Final Industrial Engines {1901, 1920}
C3.4B Industrial Engine Alarms and Shutoffs
2014/06/27 New Software Is Now Used on Certain CG137 Engines {1901, 1920}