C4.4 Engines for Caterpillar Built Machines Caterpillar


Inlet Manifold Pressure Sensor - Remove and Install

Usage:

C4.4 2W2

拆卸步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。




    图 1g01480192
    典型示例

  1. 将锁片 (2) 滑入解锁位置。

  2. 将线束组件 (3) 从进气歧管压力传感器 (1) 上断开。

  3. 使用深套筒拆下进气歧管压力传感器 (1)。

  4. 将 O 形密封圈 (4) 从进气歧管压力传感器 (1) 上拆下。

安装步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。




    图 2g01480192
    典型示例

  1. 将新的 O 形密封圈 (4) 安装到进气歧管压力传感器 (1) 上的槽中。

  2. 使用深套筒安装进气歧管压力传感器 (1)。 将进气歧管压力传感器拧紧至扭矩为 10 N·m (89 lb in)

  3. 将线束组件 (3) 连接到进气歧管压力传感器 (1) 上。

  4. 将锁片 (2) 滑动到锁定位置。

Caterpillar Information System:

C3.4B Industrial Engine Diesel Exhaust Fluid Filter - Clean/Replace
C3.4B Industrial Engine Coolant (ELC) - Change
C3.4B Industrial Engine Coolant (DEAC) - Change
C3.4B Industrial Engine Welding on Engines with Electronic Controls
The Third Clutch Friction Disc May Fail on Certain 777 Off-Highway Trucks{3054, 3155, 3160} The Third Clutch Friction Disc May Fail on Certain 777 Off-Highway Trucks{3054, 3155, 3160}
C3.4B Industrial Engine Reference Information
C3.4B Industrial Engine Plate Locations and Film Locations
C3.4B Industrial Engine Model View Illustrations
C3.4B Industrial Engine Battery Disconnect Switch
C4.4 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Tank - Flush
C4.4 Engines for Caterpillar Built Machines Bearing Clearance - Check
2014/11/19 Improved Product LinkTM and Product Link WebTM Software Is Now Available for All Cat® Products Equipped with PLE640, PLE641, PLE631, PL641, and PL631 Systems {7606, 7620}
C4.4 Engines for Caterpillar Built Machines Secondary Engine Speed/Timing Sensor - Remove and Install
C3.4B Industrial Engine Product Storage
2015/02/27 New Software Is Now Used for C27 and C32 Tier 4 Final Industrial Engines {1901, 1920}
C3.4B Industrial Engine Alarms and Shutoffs
2014/06/27 New Software Is Now Used on Certain CG137 Engines {1901, 1920}
C3.4B Industrial Engine Gauges and Indicators
2014/07/07 New Engine Software Is Used on CG137-12 Generator Set Engines {1901, 1920}
C13, C15, and C18 Tier 4 Interim Engines Exhaust System Contains Coolant
C13, C15, and C18 Tier 4 Final Engines Exhaust System Contains Coolant
455-1195 Top End Overhaul Foundational Kit for C18 Marine Engines{1000} 455-1195 Top End Overhaul Foundational Kit for C18 Marine Engines{1000}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700} 456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
3516B Generator Set Engines with Dynamic Gas Blending Engine Has Early Wear
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.